PDA

View Full Version : Can i get a 4500 Flatline drop thing for my 3000?


MajorDamage
12-14-2001, 04:15 AM
Can I get the dropforward adapter for the 4500 PSI Flatline and put it on my 3000 PSI Flatline? And if so, how much $$$ does it cost? Thanx.

ENDO!
headcase
12-14-2001, 05:35 AM
you mean so you can use other drops other than the built in AGD one? Yes, I don't know if you can get it from AGD, I don't see why not I think the regs are the same size, but I know CP makes one.

http://www.customproducts-az.com/cradels.html

it's on that page near the bottom, 18 + shipping direct from CP, it allows you to use ARM/APOC drops with a rail type mount.

Later
SSDD
Major Ho
12-14-2001, 09:20 AM
What kind of mounting system does the 4500 take anyways? I saw a pic but it just looked like a longer version of the 3000. Do you all think the Kapp DZ II will fit it?
Potatoboy
12-14-2001, 09:22 AM
With the 4500 or the adapter from CP or from AGD (Tom said he was going to put it in the store) you can use any drop that uses a dovetail mounting system.
magc68
12-14-2001, 11:05 AM
flatline adaptor from Custom Products, it will cost $20. or u can the very similar AGD version from AGD i would guess.
damageinc54
12-14-2001, 01:04 PM
I have a CP flatline adapter on both of my 3000psi flatlines. I use the 1.5 CP flame drop. Looks really cool!!
MajorDamage
12-14-2001, 02:34 PM
Yeah I knew about the CP ones, I juste wondered if AGD would sell their model :D hehe

ENDO!
Potatoboy
12-14-2001, 02:39 PM
Tom said here (http://www.automags.org/forums/showthread.php?s=&postid=153816#post153816) that they would have one in the store.
MajorDamage
12-14-2001, 02:43 PM
Thanx alot Mr.PotatoBoy! Now I have the 411 on this shibby lol.

ENDO!
RaV3n_Pa1ntba||
12-14-2001, 02:47 PM
I dont exactly see how this would work without drilling (from the pics at the cp site) .... someone have pics of it?
headcase
12-14-2001, 03:20 PM
http://store.airgun.com/agdprod/images/products/ACF3CD9.jpg

you see the two nuts above the chrome band at the front of the reg? Those hold the drop to the reg.

Take those out. Add this, it's upside down in the pic. Put screws and nuts back in.

http://www.customproducts-az.com/Photos/SmFlatline.jpg

and you basicly get this, which is the stock mounting on the 4500 flatlines.

http://store.airgun.com/agdprod/images/products/4500__med.jpg

Does that clear it up at all?

Later
SSDD