PDA

View Full Version : Spydermag?


FARMER00
02-16-2006, 03:25 PM
What makes a mag a spydermag?
Arstron
02-16-2006, 03:27 PM
You take a electronic spyder frame and modify it so it can trip the sear of an automag. The current options is modifying the sears, turning the solenoid around, or turning the solenoid around and modifying sears (this is only done by luke). Its a great cheap way to make your automag electronic;.
shocker357
02-16-2006, 10:09 PM
http://i18.photobucket.com/albums/b134/shockeruti/spydermag2.jpg
http://i18.photobucket.com/albums/b134/shockeruti/spydermag1.jpg
Arstron
02-17-2006, 10:34 AM
That frame looks great on that mag! :D
luke
02-17-2006, 10:47 AM
Well I would call that a "Dragun-Mag"

Here is a Spyder-Mag". :D

http://www.lukescustoms.com/SM-1.JPG

And another

http://www.lukescustoms.com/Karta-SpyderMag.JPG
shocker357
02-17-2006, 04:06 PM
it'll look better with a ule body on it =D
upjeeper
03-31-2006, 08:10 AM
i've been searching and haven't found any how to's on it
you guys got any suggestions? can i use a regular mag valve? what are the differences between the sypder models and how do i know what one to use?
BigEvil
03-31-2006, 08:26 AM
Here's a tutorial from PBN
Spydermag How-To (http://www.pbnation.com/showthread.php?s=&threadid=696650&perpage=40&highlight=&pagenumber=1)
luke
03-31-2006, 09:00 AM
Here's a tutorial from PBN
Spydermag How-To (http://www.pbnation.com/showthread.php?s=&threadid=696650&perpage=40&highlight=&pagenumber=1)

These instructions are easier to follow>>

PM me.
I'll send you an invoice.
You send PayPal payment, then send the parts to me.

It dosen't get easier than that.

:D
BigEvil
03-31-2006, 09:19 AM
These instructions are easier to follow>>

PM me.
I'll send you an invoice.
You send PayPal payment, then send the parts to me.

It dosen't get easier than that.

:D

QFT.

I forgot about ya, sorry :sleeping:

BTW, Im STILL waiting on one more thing before I can send my stuff off to you. Should be soon. I'll PM you nest week when its on the way.
luke
03-31-2006, 09:25 AM
:) It's all good.
The_Leech
03-31-2006, 11:34 AM
How well does it work? Is it worth it for a long time use? Like would you want to upgrade it afterawhile or is it good as it is?
Aslan
04-04-2006, 01:47 PM
I thought about making my mag into a spydermag...but my Spyder is an old mech Spyder, Pre-2000...so I figured what's the use? All that would do is make my Spyder inoperable...unless...I put the Mag lowers on the Spyder!? :rolleyes: :rolleyes:

But on a more serious note...will any electrospyder lowers work?
FARMER00
01-03-2007, 12:21 PM
I thought about making my mag into a spydermag...but my Spyder is an old mech Spyder, Pre-2000...so I figured what's the use? All that would do is make my Spyder inoperable...unless...I put the Mag lowers on the Spyder!? :rolleyes: :rolleyes:

But on a more serious note...will any electrospyder lowers work?
any one know? im interested
StygShore
01-03-2007, 02:39 PM
How well does it work? Is it worth it for a long time use? Like would you want to upgrade it afterawhile or is it good as it is?


I put about 20000 shots through the red/black Karta in that pic before I traded it off for my X-mag. So it works VERY well, and I never experienced any problems with it besides outshooting my revy :)


As far as frames, I think it will work with any spyder/clone frame. Luke had some really nice ones on his site at one point that looked to be made a lot better quality than the standard spyder/clone frmaes that I have seen out there.

Styg
Pneumagger
01-03-2007, 02:45 PM
Luke... If I get you a vert frame, solenoid, board, and switch - could you turn it into a spyderframe? Make it work somehow?

Will you be my Katie Couric?
bigguy
01-16-2007, 11:03 PM
so how much does it cost to do this? like could i trade my ULE trigger frame plus $40 for a spyder lowers than or what? what is the total cost?

SOMEONE PM ME!
punkncat
01-16-2007, 11:34 PM
so how much does it cost to do this? like could i trade my ULE trigger frame plus $40 for a spyder lowers than or what? what is the total cost?

SOMEONE PM ME!

Find a cheap used electro spyder and you have a start.....
warbeak2099
01-16-2007, 11:57 PM
BTW if anyone is thinking about getting your Spydermag job done by Luke, stop. Thinking about that is very bad and it's a waste of time. Just do it. He does incredible work. My mag is crazy fast now. His work is clean and most important of all it's fast as hell.
jenarelJAM
01-17-2007, 02:46 AM
BTW if anyone is thinking about getting your Spydermag job done by Luke, stop. Thinking about that is very bad and it's a waste of time. Just do it. He does incredible work. My mag is crazy fast now. His work is clean and most important of all it's fast as hell.
I read that and was like... What?
And then I finished it :cheers: