PDA

View Full Version : Look!?!?!?E-mag ???


paublo25
02-18-2006, 09:42 PM
Hey would this work to charge my e-mag battery?
Sorry new link=
http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=1230&SSAID=120246
skriptal
02-18-2006, 09:49 PM
Hey would this work to charge my e-mag battery?
http://www.batteryspace.com/index.as...SSAID=12 0246


Bad Link
paublo25
02-18-2006, 10:45 PM
Ok I fixed the link.
FARMER00
02-19-2006, 11:49 AM
id have my doubts
personman
02-19-2006, 12:10 PM
emag batteries are 16.8v and 650 mA
kevdupuis
02-19-2006, 01:22 PM
Hey would this work to charge my e-mag battery?
Sorry new link=
http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=1230&SSAID=120246

Check this thread,
http://www.automags.org/forums/showthread.php?threadid=81589&highlight=Emag+wall+charger
paublo25
02-19-2006, 05:13 PM
Hey kev...would this work without the original charger for the e-mag battery? Cuzz I don't have the charger itself.
sean33
02-19-2006, 05:42 PM
just go to Radioshack and by a 12 volt charger..thqats works for me unless e-mags are diff from my x-mag
personman
02-19-2006, 05:55 PM
Hey kev...would this work without the original charger for the e-mag battery? Cuzz I don't have the charger itself.
No. No charger will work for your battery except the AGD one, they build the chargers at AGD specifically for the emag.
shades
02-22-2006, 01:33 PM
I am not Quite sure if you should charge NIMH on a Li ion charger.
impy4335
02-22-2006, 05:35 PM
here's one for $14 (http://www.automags.org/forums/showthread.php?t=192108)
paublo25
02-22-2006, 07:58 PM
No I need the actual CHARGER not just a wall plug.
paublo25
02-22-2006, 08:11 PM
Ok now I know people are prolly get'n ed off at me about this but I don't want to spend $80 on a charger.....but how about this http://www.onlybatteries.com/showitem.asp?ItemID=13558.14
latches109
02-23-2006, 12:32 AM
No. No charger will work for your battery except the AGD one

not true.
neppo1345
02-23-2006, 12:48 PM
Ok now I know people are prolly get'n ed off at me about this but I don't want to spend $80 on a charger.....but how about this http://www.onlybatteries.com/showitem.asp?ItemID=13558.14

I'm not making any promises...but based on the charge flow, and capacity, I'd say that would work. Just make sure you use the lower switch setting so you dont fry your cells...

and...I'm not 100% sure...so use it at your own risk...

also make sure you put the temp sensor inside the pack...which means cutting into the shrink wrap on your battery which one slip could ruin the battery... So if you screw up, you might be out of a battery...

Just drop the 80.00 on the agd charger...or buy one used...