View Full Version : AGD screw size question?
kingpen509
03-02-2006, 11:36 AM
Well to give you a little backround I'm attempting to put a tac-one rail, ULE body, and Intelliframe together and for some reason my stock front screw (not the field strip screw) that goes into the ULe body wont catch I dont know if anyone else has had this problem when adding a thicker rail but I think I'm goint to need a longer bolt.
So here is my question what is the threading on the stock bolt and what is the length?
I probably only want to go a quarter inch longer.
Thanks
-Dustin
KayleAGD
03-02-2006, 11:38 AM
Well to give you a little backround I'm attempting to put a tac-one rail, ULE body, and Intelliframe together and for some reason my stock front screw (not the field strip screw) that goes into the ULe body wont catch I dont know if anyone else has had this problem when adding a thicker rail but I think I'm goint to need a longer bolt.
So here is my question what is the threading on the stock bolt and what is the length?
I probably only want to go a quarter inch longer.
Thanks
-Dustin
10/32
kingpen509
03-02-2006, 11:54 AM
Is it 3/4 of an inch long?
PBCapo
03-02-2006, 12:05 PM
http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=415&categoryID=95
marpat
03-02-2006, 12:07 PM
what is the threading for this screw?
http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=243&categoryID=16
thanks!
PnueMagger
03-02-2006, 03:57 PM
look for 10/32 machine thread screws. There are a ton of different heads to choose from. they are like 14 cents a peice @ a hardware store.
marpat
03-02-2006, 04:01 PM
look for 10/32 machine thread screws. There are a ton of different heads to choose from. they are like 14 cents a peice @ a hardware store.
sorry should have been more specific.. that is a different thread size than the vert asa screw.. the one i linked to is the vert asa screw.. seems to be a larger thread than the 10/32 ones.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.