Compatible Barrels with the Automag .68 Pro Classic

[RossRobObey]

What barrels are compatible with the automag .68 pro classic?
is it all barrels with ..... design or something like that?

Thanks

[skriptal]

you mostlikely do not have a ULE body on the mag, so you would need a twistlock barrel.

[RossRobObey]

you mostlikely do not have a ULE body on the mag, so you would need a twistlock barrel.

what if i get a minimag body on it, does it make any differnce, becuase most barrels now are the autococker type where you have to screw the barrels on arnt they?

[Def Jeff]

The only AGD bodys that are cocker threaded are the ULE Body and the Xmag body. ULE body's are easy to find.

[RossRobObey]

The only AGD bodys that are cocker threaded are the ULE Body and the Xmag body. ULE body's are easy to find.

where can i get some right/left feed versions of these as at AGD i can only find vertical and warp??

[rb211]

The ULE's are only made in vertical or warp.

[RossRobObey]

The ULE's are only made in vertical or warp.
ok thanks, so is there anyway i would be able to have a ULE body with vertical feed and a sight?

[rb211]

No, unless you figure out how to mount one to the side of the gun.

[RossRobObey]

No, unless you figure out how to mount one to the side of the gun.

Ok, I've found this http://www.paintball-discounters.com/get_item_030106par_in-your-face-offset-sight-rail.htm Do you know if it would be any good and if it would fit an AutoMag .68 Pro Classic?
If no to them, Is it hard to aim with a Vertical Feed Hopper, as i have only shot Left Feed

[ahellers]

no it wont
automags do not have a stander sight rail. unless you find an after market one.
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Xn_-FI3HEyr-hcnb3s8-vIdhFhDbB7kbxd4=?ProductID=53usFAY7Yp0AAAD3N9ulA_2 s
but putting those two togerther might make it look real ugly.
t

[RossRobObey]

no it wont
automags do not have a stander sight rail. unless you find an after market one.
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Xn_-FI3HEyr-hcnb3s8-vIdhFhDbB7kbxd4=?ProductID=53usFAY7Yp0AAAD3N9ulA_2 s
but putting those two togerther might make it look real ugly.
t


how does it fit on, is it upside down and the rounded bit clip onto the body?

[ahellers]

thats what it looks like.
i guess the guy that took the pic didnt know much about mags
t

[RossRobObey]

ok thanks, again

[shades]

If you are using a red dot site you can have a vertical feed. Maginfied scopes are worthless on a paintball marker. You will never hit anything in the crosshair due to the nature of the paintballs.

[RossRobObey]

i dont suppose you would be able to tell me more about the RED DOT SITES as this is the first time i have heard of them. maybe a link to a website??

Thanks

[ahellers]

hes a link on some info
http://www.specialopspaintball.com/articles/sights.asp
and
http://www.specialopspaintball.com/articles/paintballgunsights.asp
one more
http://www.specialopspaintball.com/shop/category.asp?CAT=118203&PAGE=ALL
t

[RossRobObey]

so how do i use this sight with a vertical feed, because dont you have to look through the site?

[ahellers]

you do im not real sure what he was gitting at. i had a red dot on my old a-5 and if i didnt use a offset rail the hpper got inthe way and i couldnt use it vary well. an the a-5 has an off set hopper.
t

[RossRobObey]

ok, thanks. so do you think i would be able to use it with a vertical feed and n off-set site rail?

[ahellers]

if you want to use it w/ a vert feed then you need a sight rail, and you need to mount an off set rail to it. also make sure that everything uses the same mounting system (dove tail, pickany (sp) ect...). because if it doesnt then nothing will fit together.
t

[RossRobObey]

ok, what sight would you advise me to get? As you seem to know quite a lot about them
Ross