Is it possible? ULT on Emag?

[RavishingEddie]

Hello everyone, maybe this is a bad question, but I was wondering if I can install a ULT on my Emag for the Mechanical side of it. The Emag is awesome on Electrical, I have no problem whatsoever with that and am very happy. I just wanted to know if I can make my the mechanical function shoot faster.

[Remington]

I've played with one installed on an E-mag (not mine) and it worked very well! From what I understand though, it works on a case to case basis, so give it a try and tell us about your results!

[Dark Frost17]

i have 1 on my emag with no problems.....i thought u where suppsed to use the RT on off though...

[shades]

The ULT is NOT recommended for the Emag due to the decrease in recharge rate. The on/off is what resets the selonoid with a ULT it reduces the reactive trigger reducing rate of fire. Plus it not recomended By AGD. I personally think you are going to end up bending the the ULT pin at high rates of fire, then you will be done until you get a new pin. If it works in your marker Great. But now you know the risk. Don't boo hoo when you break your $900 marker.

[ThePixelGuru]

Well, the risk is to the ULT itself, correct? You're only risking an on/off pin worth a couple of bucks. Just keep your stock on/off with you at the field and stuff and you won't have any problem. Right?

[syl58]

i had the same question because i had a mech marker with ult and just bought emag lowers.


it looks like tunaman and a lot of other people say that you should use the EMAG on off and need a "quad oring" which is unique to the emag. the rt one i think will work but you need to get the right sized pin, which is is think .712 where the rt on is .750

i just bought one off tunaman so i dont ruin anything

[Dark Frost17]

Can some 1 please show me a picture of the right 1 i should be using....i have 2 on-off's the ult and one that lookslike the RT on off... when i put it in my marker goes like fullauto when i pull the trigger and does not stop..., so i put the ult in with no problems :confused:

[shades]

YOU need this (http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=195&categoryID=24), this (http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=205&categoryID=24) and
this (http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=395&categoryID=24)

[Dark Frost17]

http://www.jayloo.com/files/pics/35000/Pins_tn.jpg (http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=35768)

2 of them are the same size but the 3rd is shorter.....what 1 do i use? :confused:
i do not rember the 1 that made it go full auto when i aired it up

[Dark Frost17]

anyone? :confused:

[Tunaman]

You cant just guess on pin size. It SHOULD be a .712. and make sure you put the 2 orings in if you aren't using the ULT. The ULT pin is too long for an emag. You will have problems if you use it. You need either a Micrometer (0-1") range is great for pins. Or you can get a cheap pair of digital Calipers to do the same thing. Every Mag owner should own one.

[Dark Frost17]

You cant just guess on pin size. It SHOULD be a .712. and make sure you put the 2 orings in if you aren't using the ULT. The ULT pin is too long for an emag. You will have problems if you use it. You need either a Micrometer (0-1") range is great for pins. Or you can get a cheap pair of digital Calipers to do the same thing. Every Mag owner should own one.

Okay.... i will take it to work tomorrow to use the micrometer....(dont have 1 at home)..i was not aware that a oring went around the funny shaped black oring ..... :rolleyes:

Thanks :D

[Dark Frost17]

i have 2 pins that are .712 and the shorter is .645....i got everything working great.....way faster then it was with the ult and no chuffing...... :D

but my question is what woud that shorter pin be used for? :confused:

[Dayspring]

Micromag pins are that short.