PDA

View Full Version : full auto mag?



jtcass
04-10-2006, 07:17 AM
I'm working on a replica ww2 m1a1 thompson mag, and i was wondering if there are any ways that i can make it full auto without going electronic. i'm open to any suggestions.

geekwarrior
04-10-2006, 08:34 AM
adjustable tank...get your input pressure up to 900+psi....not full auto, but close enough

I had mine full auto this weekend....the oring in my on/off was to big, so the pin wasnt reall tight......5 balls per pull...but my hopper couldnt keep up.

post some pics when you're done, I love thompsons :headbang:

PBCapo
04-10-2006, 07:02 PM
u could consider makingn a little wheel type thing that you spin in circles and it transfers that motion into a backward forward motion to pull the trigger

Recon by Fire
04-10-2006, 08:12 PM
X-valve with mis-adjusted ULT and an adjustable tank. Even better if you could add a p-frame to the mix.

Tunaman
04-10-2006, 08:19 PM
;) one misplaced oring will get you the effect you are looking for. This is for show right? Not to play with?

3pac
04-10-2006, 08:22 PM
I'd hope its only for show, but isn't it the same or darn near close to ramping tunaman :eek: ? Doing the misplaced o-ring or the high input pressures both work.

ThePixelGuru
04-11-2006, 02:42 AM
Bounce is your best bet.

jtcass
04-11-2006, 06:58 AM
the gun is not going to be for show. its probably going to be my primary gun. if i was going to play some speedball, i would tune it so i had it legal. the full auto is just an option to make the gun very realistic.

jtcass
04-11-2006, 12:36 PM
what is this misplaced o-ring thing you're talking about?

geekwarrior
04-11-2006, 01:28 PM
..i don't know what he's talking about, but like I said before, if the oring inside the on/off is to big (or maybe not even there?) its full auto. I bent my sear rod this weekend it was so fast! :shooting:

captian pinky
04-11-2006, 01:45 PM
classic valve with out the top part of the on/off talk about fun ull have to turn the air off trust me

e-qwiped
04-18-2006, 10:11 PM
I have an X-valve and ult and with this setup all i have to do to make it full auto is remove the on/off pin o-ring (I only saw one i could remove neway located at the top of the on/off valve)? :(

bentothejam1n
04-24-2006, 09:01 PM
a modded trigger on a tippmann can shoot pretty dam fast, although it chops like no other