My first automag an i need some help

[MINI0N]

I just got my very first automag an RT from a buddy of mine for a very low price but i'm not shure wats wrong with it it's leakin out the front of the valve, if any body can give me any tips on wat might be wrong it would be appreciated, plus he didn't give me the manual so i was wonderin if anybody knew where i could down load one i would also really appreciate an exploded view. thnks for ur time and help.

[MoeMag]

Hey there all of the following is available here…
http://www.airgun.com/

There are 2 types of r/t which do you have…

Original RT (banjo bolt and gas through rail) manual…
http://www.airgun.com/Images/rtmanual.pdf

Original RT diagram is on page 4 of this...
http://www.airgun.com/Images/rtblowup.pdf

-or-

ule/pro RT (gas goes into side of valve) Manual…
http://www.airgun.com/downloads/RT-ULE.Tac-One.Manual.pdf

Exploded view of ule/pro R/T valve…
http://www.airgun.com/downloads/retroexploded1.pdf

Unfortunately I am not quite the fix it gun wizard yet so I will leave the specific problem to someone else…

Welcome to AO!
:cheers:

[bit-wizard]

Air it up and pull and HOLD the trigger in. Hold it like this for a minute. If there is no leak, or if the leak stops during this time, then the problem is most-likely the power-tube o-ring (inside the power tube tip). Either oil it good, or replace it and your problem will likely be fixed.

bit-wizard :ninja:

[MINI0N]

thnk you very much guys i really apreciate it