classic mag . bang !! chuff chuff chuff..(pics)

[wishone]

so i just replaced the regulator piston assymbly to stop it from leaking out the back .... its not leaking what so ever !! :clap: finally !!! ................
Now i just oiled up and air'd up ... i put it on the chrono .......... the first shot is about 350 :eek: :eek: way too high yes i know ......... but its only the first one . every shot after that is chuff chuff chuff chuff chuff chuff ............... without paint ........what could it be ..... i have a regular valve with a LAB Hurricane 8 hole rear ........... heres some pics .

http://img.photobucket.com/albums/v339/wishone/AutoMag/acb09744.jpg

http://img.photobucket.com/albums/v339/wishone/AutoMag/gun005.jpg

http://img.photobucket.com/albums/v339/wishone/AutoMag/pic002.jpg

http://img.photobucket.com/albums/v339/wishone/AutoMag/gun001.jpg

please help me out guys ........... i wanna play tomm .....?? i have lots of extra parts here so lmk :tard: :cheers:

[Sudz]

Blue crossfire = LP tank.

You need to be using a HP tank, I dont know if that was just a pose shot, but if your using a LP tank, thats your problem.

[wishone]

Blue crossfire = LP tank.

You need to be using a HP tank, I dont know if that was just a pose shot, but if your using a LP tank, thats your problem.


yeah that was my old tank ......... it was just for the pic ............ ??

this is my current tank .......

http://img.photobucket.com/albums/v339/wishone/tank50.jpg

[Dark Frost17]

350 :wow: ......thats hott..... never seen that valve before... :confused:

[wishone]

350 :wow: ......thats hott..... never seen that valve before... :confused:

:rolleyes: so no-one knows what could be my problem ????

[sniper1rfa]

uhm. Try turning up the velocity?

:P

[wishone]

uhm. Try turning up the velocity?

:P


mmm i doubt it ......... the first shot or two are already at 350 ish .......... :D

[wishone]

come on guys .............. please !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :headbang:

[buzzboy]

What bolt? Have you tried with both LX and L7? Tried with a different reg?

[rtfire1]

sounds like a reg problem. but chek your orings and oil it

[wishone]

What bolt? Have you tried with both LX and L7? Tried with a different reg?


i have no idea what bolt it is . but i have a spare one here ............. ima swap it out and try dry shooting .............i just changed the reg assy.?? :confused:

[wishone]

try the other bolt. it was a little bit longer than the one it had in it ..... but same thing ................ bang !!!! chuff chuf chuff chuff when rapid firing :confused: :confused:

[sniper1rfa]

regardless of what the first shot was, the rest were all the same - too low.


Try turning up the velocity. Can't hurt. It can only not work.


if it consistantly goes bang once you have a bad reg seat.

[wishone]

ok tried and same thing ......... soooo this is my reg seat correct ..... the middle one ????

thanks alot man............. im hopping to go play tomm ........ :clap: ...........

http://img.photobucket.com/albums/v339/wishone/AutoMag/pic007.jpg

[sniper1rfa]

The first picture - the thing in the center is the reg seat.


Remember something though - Once you open up the reg you almost always have to replace the reg seat. Sometimes itll work if you use the same one, but not usually.

[wishone]

awsome !!!!!!!................................. im going to look for one here at my house ........... if i can find one ill change it out and test again :headbang: :headbang:

thanks again !!

[paintman1142]

thats actually not a bad back there, thats a diamond labs titanium back end, i had one of those and traded it in for $100 off my x-valve.

[sniper1rfa]

I wish diamond labs was still around...

But they ended up being a short live "make money and run" business. They had a lot of stuff you couldnt get anywhere else.

[wishone]

im gonna change out the seat right now ........ thanks for all the help guys ......... but if it still chuffs then what could it be??

[sniper1rfa]

Well, its not the chuffing that is the reason for changing out the seat - its because the seat is leaking (hence the couple hot shots followed by it stabilizing lowe and chuffing).

If it JUST chuffs after you change out hte seat, turn the velocity up. If it does the "bang chuff chuff" thing, you've got me stumped.

[wishone]

wow !!!!!! ... so i changed the seat ......... then i got a bang!!!!! bang!!!! bang!!!! bang !!!!!! ....... then no aiR LOL .......... sooo ima run down to my local paint shop and fill up to keep testing ........ but it seems good ............ :clap: :clap: :clap: :clap: