Tac-One Warp Left Bodies and Markers Scheduled for Release

[AGD-OfficeGal]

Scheduled to be released May 10th. :dance:

Production costs for the warp body are higher, so expect a slight additional cost of $25-50 for these items.

Still made in the USA!

Marcia
AGD-USA

[BigEvil]

:wow:

Any chance I could get a raw one?

[AutomagRT1483]

Yeah Buddy! Bout Time! :clap:

[Chronobreak]

....2 years later.....

where those warp slugs now too ;) :ninja:

[Arstron]

warp tacs... http://www.fansofrealitytv.com/forums/images/smilies/drool.gif

[m-a-r-k-7]

W00t!

[AGD-OfficeGal]

:wow:

Any chance I could get a raw one?

Yes you can, but you need to order immediately because the bodies are going to the anodizer tomorrow (Friday).

Marcia
AGD-USA

[LONEWOLFOO1]

HELL YEAH!!! i am glad this is hapening but do i still i need to cut part of the subframe or will you sell the warp feed frame with everything it needs. btw will it have centered pictany rails so i can put a scope on the center. no this is the ultimate woodsball gun. btw links for purchase.

[evildead420]

no way, warp tac one, pure awesome' :cheers: :dance: :dance: :hail: o

[Evil Bob]

Pics please!

-Evil Bob

[HOMELANDEFENDER]

I THINK I JUST CRAPPED MYSELF - LOL. :eek: :dance:

I can't decide whats cooler -- A TacOne Warped mainbody or the fact that AGD is actually about to release NEW product? !!!!


HLD...

[Ghola]

Any chance i could get a warp slugbody?

[LONEWOLFOO1]

I just relived that a new product from agd dam times are changeing or woodsball is really getting on the map now. you can't beat the tank of the mag a woodsball gun. now if you can work on prices so i can get more of my friends to buy them. thank you agd for listening to your customers.

[buzzboy]

Is there a way to see them yet. Or will I have to wait for them to be put on the AGD site.

[borph]

FINALLY! At long last, our prayers have been answered! Sure hope the picatinny rails are centered since that pesky feed neck won't be in the way. Regardless, I'll take one in black.

[cowboy_00]

My entire team is Giddy waiting for these (woodsballers)

we played a little rec today and literally had a following of kids asking us about our markers
(Chimera, Blue emag with warp, Tac one Qbow, y-griped warped x-valve, and a few other emags)

We seriously had those other kids with there ions who thought they were hot stuff about to cry, (most definately when we pointed at a bunker and let loose with four Emags running 1200psi in Hybrid.


it was just plain sick.

I cannot WAIT for this to come out, deff start selling more tac ones once you tell the kiddies that electro isnt everything. though on an emag....its defff nice.

[buzzboy]

We seriously had those other kids with there ions who thought they were hot stuff about to cry, (most definately when we pointed at a bunker and let loose with four Emags running 1200psi in Hybrid.

Well thats just cruel...

/making those kids jealous
//will probably go and drop their money on mags

poor kids. ;)

[cowboy_00]

dang straight, we played a 6v2 (Our team vs these 2 speedballers) who really thought they could whoop us, we showed them what actually cover and fire is, and how it works on the speedball field as well as in the woods. that made the kiddies drool even more.

[FinchMan]

can we get a picture? :rolleyes:


i cant wait to see the first warped eTac-One w/ Q-loader and Xmod.


...and is this only going to be for right-handed people. :cry: :p

[REDRT]

can we get a picture? :rolleyes:


i cant wait to see the first warped eTac-One w/ Q-loader and Xmod.


...and is this only going to be for right-handed people. :cry: :p

They should've made ULE warp bodies reversible. Thread both side of the breach. Cap what ever side you want per right and left handed shooters. One body for everyone. That would just make sence.

[borph]

They should've made ULE warp bodies reversible. Thread both side of the breach. Cap what ever side you want per right and left handed shooters. One body for everyone. That would just make sence.

AGD tried that with the Xmag, but I guess they didn't sell?

<img src="http://store.airgun.com/images/product/327.jpg"> <img src="http://store.airgun.com/images/product/326.jpg">

Looks like it has it's own sight rail too.

[marpat]

They should've made ULE warp bodies reversible. Thread both side of the breach. Cap what ever side you want per right and left handed shooters. One body for everyone. That would just make sence.


heheh if they did that they wouldn't make 2x the money! AGD has to have the cash flow!

can't wait till the 10th!~ my cc is clear and ready to roll!

one question tho, will it have the weaver rail from the back all the way to the front?

[REDRT]

AGD tried that with the Xmag, but I guess they didn't sell?

<img src="http://store.airgun.com/images/product/327.jpg"> <img src="http://store.airgun.com/images/product/326.jpg">

Looks like it has it's own sight rail too.

On a marker that went over a grand for a product that wasn't too popular with the people buying the X anyway. I was thinking of a reversable warp body for any mag and not a modual for just a single marker.

[LONEWOLFOO1]

I Agree. i like the idea of going left to right to center but, i was not going to spend 1g to get that feature it should have came standard on all mags. agd shot themself in the foot great idea but not a good follow thru. imagine every mag purchase came stock with that feed system. but then again they could sell more frames by haveing them separate and more bodys that need to be milled to have the warp feed system


btw where the pics its already the 4 they should have some pics up by now.

[Arstron]

Scheduled to be released May 10th. :dance:

Production costs for the warp body are higher, so expect a slight additional cost of $25-50 for these items.

Still made in the USA!

Marcia
AGD-USA

I just realized somthing, so the warp tac bodies are going to be more expensive then a complete ion?

[LONEWOLFOO1]

OHHHHHHHHHHHHHHHHHHHHHHHHHH DAMMMMMMMMMMMMMMMMMM!!
THATS A LOW BLOW still need pics so i can convince my wallet.

[Arstron]

Its true, Tac one bodys are listed as $200 and she said it would be $25-$50 higher and ions are going for $200 now. I still would rather have a tac one body then an ion.... or atleast a Karta. :argh:

[LONEWOLFOO1]

Tommorow is the big day any links for purchase. or is it delayed?

[AGD-OfficeGal]

Tommorow is the big day any links for purchase. or is it delayed?

Keep your hair on, it's not Wednesday yet, is it?

Will be put on the store tomorrow, may or may not have pictures...

Marcia
AGD-USA

[God of Smoothies]

When are they going to be added to the online store??


:headbang:

[LONEWOLFOO1]

Keep your hair on, it's not Wednesday yet, is it?

Will be put on the store tomorrow, may or may not have pictures...

Marcia
AGD-USA

ITs the 10 where it at i love being a pain in the but its a rare event to have a new agd product come our they should be number i want all zero's

[AGD-OfficeGal]

On the store now:

Marker: http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=460&categoryID=81

Mainbody: http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=462&categoryID=10

Pictures to come...

Marcia
AGD-USA

[LONEWOLFOO1]

i see that you are offering a milled tac rail with this deal is this the same one that mounts up to the spec ops longbow kit i will try to find a pic.

[LONEWOLFOO1]

heres some pics of the varies rails on the tac one witch ones will be milled?

http://i33.photobucket.com/albums/d56/freeshadow/T1011.jpg

http://i33.photobucket.com/albums/d56/freeshadow/T1009.jpg

this is the rail i own now (silver tab) i think this was your best

http://tinypic.com/iqijd2.jpg

i would like to see a pic before purchase i am going to buy one!!!!!!!

[p8ntball72]

If the feed comes out where I think it does, You "MAY" have to mod the spec ops shroud.
Just a guess though.

[LONEWOLFOO1]

if i can't sell my longbow kit the shroud is going to get modded anyway lots of hacking and cutting and welding.

[LONEWOLFOO1]

I just order one so i will have a pic up with the rail they will provide

[tacq]

i have one for a tac-one i can send picks if you want me to i kant sell it tell the end of the month

[LONEWOLFOO1]

NO i may sell my longbow kit i have one already but then again all i need is a trigger frame and a valve then i have anoher gun.

[God of Smoothies]

Payed for 2nd day air... and didn't come in 2 days... :mad: :cuss: :mad:

[LONEWOLFOO1]

refund mines has been sent out today

[bentothejam1n]

that's not AGD's fault, its usps's fault. they aren't guaranteed to be there in two days

[p8ntball72]

Online order processing usually takes a day or two.

[DSR75]

When do yall think you will have some pics of the new body?

[LONEWOLFOO1]

Mines came in at work today. but on of the delivery guys misplaced it.

[LONEWOLFOO1]

i just got mines but i thought that the picantty rails would be centered its just like the tac one with the warp feed to the side. :(

http://tinypic.com/iqijd2.jpg

none the less i am glad that they made one but how do i mount a scope in the center? links to rails adapters please i will try to post pics tonight or maybe not i like to keep you guys in mystery.

[Severe]

That's kind of sad really. What made the Tac-one body innovative was the fact that the 45 degree rails allowed for clearance of the vert feed. I was expecting some common sense to be applied to the Warp-tac bodies leaving it with a full picatinny rail on top rather than the two angled rails. I have to believe it would have been cheaper to mill with a flat top also.

Seems like just picking up a warp ULE body and putting a sight rail on it will be a better option for most.

Yankee Hill makes some nice off-set sight rails which 'might' make it possible to have two parallel rails on the warp tac body. They look like this:

http://yankeehill.bizland.com/store/media/Angle_Mounts.jpg

You can find them here:

http://www.yankeehillmachine.com/store/rails.html

[borph]

That's kind of sad really. What made the Tac-one body innovative was the fact that the 45 degree rails allowed for clearance of the vert feed. I was expecting some common sense to be applied to the Warp-tac bodies leaving it with a full picatinny rail on top rather than the two angled rails. I have to believe it would have been cheaper to mill with a flat top also.

Seems like just picking up a warp ULE body and putting a sight rail on it will be a better option for most.

Agreed. It would've made a lot more sense to start this thread BEFORE they hauled off to the machine shop half-cocked. WWTKD?

[HOMELANDEFENDER]

That's kind of sad really. What made the Tac-one body innovative was the fact that the 45 degree rails allowed for clearance of the vert feed. I was expecting some common sense to be applied to the Warp-tac bodies leaving it with a full picatinny rail on top rather than the two angled rails. I have to believe it would have been cheaper to mill with a flat top also.

Seems like just picking up a warp ULE body and putting a sight rail on it will be a better option for most.

Yankee Hill makes some nice off-set sight rails which 'might' make it possible to have two parallel rails on the warp tac body. They look like this:

http://yankeehill.bizland.com/store/media/Angle_Mounts.jpg

You can find them here:

http://www.yankeehillmachine.com/store/rails.html

Tried it -- doesn't work.

HLD...

[Evil Bob]

They didn't change the rail configuration for the warp feed? Major bummer!!!

Yeah, definitely would have been worth while to ask what kind of configuration the AO members might want.

I'm so glad I didn't buy one without seeing or knowing the configuration first. They need to go back to the drawing board, remove the two angled rails and replace them with a squared flat top and two sides.

-Evil Bob

[LONEWOLFOO1]

I wonder if they will do that because it just does not make sense. whats the point of haveing a warp feed body with the sight rails right in the way. now i know why they didn't post pics. shame on you agd :nono: you better make a adapter or i want a refund i never open the package. you have 10 days . i will keep the mill rail though i always wanted a back up.

now all you guys owe me one!!!!!! really!!!!!!! i think i was the first one to order one. i saved you guys money.

agd girl responce.

[LONEWOLFOO1]

So what you are saying that this is i should not expect a change for at least 5 years i will hate to crack this thing open just to find out a year from now you guys do it right if thats the case i will keep it.

[evildead420]

and im still waiting for what the damn thing looks like. lol.

[cowboy_00]

look at the page on Airgun.com.

and honestly what could would having vertical rails do you anyway? it would be hard to see out of sights set that way, if you put a laser there it would be blocked by the warp, etc.

IF you look at it from a practicality of use standpoint the angled Tac rails are still a pretty good idea.

[evildead420]

i really like it! whats the point of a scope anyway :tard: all you need is a light and night vision. that would be sick to get. will see soon . thanks rogue

[LONEWOLFOO1]

just make some adapters so you can put a scope in the center a 3/8 dovetail can fit in there

[p8ntball72]

Why not just mount your scope on the front? :tard:

This design is the most practical.
Before with the vert feed, the front rail was unusable.
Now players can take full advantage of the available Rails.

Thank you AGD for the Warp Tac body.

[LONEWOLFOO1]

i thought of that but i have to try it first man. i have so many tactical longbow,qbow,warp,bow qloader bow. i can configure it for any type of scenrio play i figure how hard will it be to mill out a adapter for the guys that want the scope in the back. agd can do it for 200 plus they can. even though i complain about it i was the first one to order it sight unseen. so i am willing to buy a adapter so it can use dovetails 3/8 and 7/8 weaver rails. i just want my red dot sight in the rear thats all. get to work agd you know i will buy it i bought a warp feed a month ago and paid full price. you are defiently making money off of me.

[ttink]

Before with the vert feed, the front rail was unusable.
Now players can take full advantage of the available Rails.

I wouldnt say that. You could always stick a flashlight up there or something. As for this new warp-tac, why not just put the scope on the other side? it cant hurt you that much...

[Sniper1]

i really like it! whats the point of a scope anyway :tard: all you need is a light and night vision. that would be sick to get. will see soon . thanks rogue


I saw some nice Gen1 NV on ebay theres one for 300 i may just bid on we will see if it doesnt go up id nut for a Gen2 or 3 tho :)

[HOMELANDEFENDER]

Nothing for nothing , I also thought that it would be cool to have a rail that sits on top to the rear. But lets face it, it is what it is --- But thats not so bad. I put sights on EVERYTHING, and now looking at what they are offering I'd say that the front rail is now usable for this purpose. Magnified scopes are not applicable to paintball, but red dots are. And in this case, you can very easily mount almost any kind of popular red dot sold on the forward rail. Trust me -- it may not look uber-cool, but it will be more functional sitting farther forward. Placing the red dot up front in the "scout position" will allow you greater peripheral view of the area where you're scanning. I say thanks AGD. -- At least they tried to accommodate, and it'll work just fine.

HLD...

[nippinout]

Nothing for nothing , I also thought that it would be cool to have a rail that sits on top to the rear. But lets face it, it is what it is --- But thats not so bad. I put sights on EVERYTHING, and now looking at what they are offering I'd say that the front rail is now usable for this purpose. Magnified scopes are not applicable to paintball, but red dots are. And in this case, you can very easily mount almost any kind of popular red dot sold on the forward rail. Trust me -- it may not look uber-cool, but it will be more functional sitting farther forward. Placing the red dot up front in the "scout position" will allow you greater peripheral view of the area where you're scanning. I say thanks AGD. -- At least they tried to accommodate, and it'll work just fine.

HLD...

I used to think the same thing about scopes.

After playing scenario and big games I have changed my mind. It would be nice to have something like a scope or binoculars so you do not need to have a standoff just because you cannot tell who is on what team.

The Tac-One Warp looks awesome.

[HOMELANDEFENDER]

If it works on this: http://i2.photobucket.com/albums/y24/HOMELANDEFENDER/ChiComWoodChipper.jpg

...It will work on this: http://i2.photobucket.com/albums/y24/HOMELANDEFENDER/WarpedTac.jpg


HLD...

[HOMELANDEFENDER]

I used to think the same thing about scopes.

After playing scenario and big games I have changed my mind. It would be nice to have something like a scope or binoculars so you do not need to have a standoff just because you cannot tell who is on what team.

The Tac-One Warp looks awesome.

Yeah -- I agree, thats why I carry a compact 10x scope in my cargo pockets of my BDU's. I used to have it mounted to the TacOne but after taking several hits to the scope I realized it was not worth keeping it exposed to shots. Red dots take hits better -- less to go wrong.

HLD...

[borph]

Which sear does the milled TAC rail require?

[Gunga]

Which sear does the milled TAC rail require?

The TAC rail takes a RT Pro/Emag sear.

[svenneves]

You can easily fit a scope in the front, or on either side, thank you so much agd i love this body.

http://i33.photobucket.com/albums/d60/svenneves/eTacside.jpg

http://i33.photobucket.com/albums/d60/svenneves/eTacfront.jpg

http://i33.photobucket.com/albums/d60/svenneves/eTacone.jpg

As far as scope hits... just get some scope covers.

again thank you agd!

[A-Tach-One]

svenneves, that looks awesome. :cheers:

[p8ntball72]

Nice scenario rig, We should have a game of "guess my weight"....

[Battlewear]

Svennes

That is wicked man!!! Trully wicked!!!

I am not a senario player much, but that would be wicked to be next to..

I say Grats AGD on the updated body! Looks good!
For those who poo poo it, I say :nono:

If AGD is listening to its fans and producing products then let them do so!

Where is the AGD LOVE? :) Have you hugged your AGD today? :)

:D

[borph]

http://i33.photobucket.com/albums/d60/svenneves/eTacfront.jpg

Is it not counterintuitive to block the sight rail by putting a feed neck directly in front of it?
Is that not the very reason TK angled the rear ones for a clear view around the center feed?
Will AOers have to agonize another two year wait for a less slapdash design?

[svenneves]

my point was that the feed DOES NOT BLOCK the view, it works great to have a red dot on the left side.

[borph]

my point was that the feed DOES NOT BLOCK the view

You can't be serious. Would you mind taking a no-flash picture from directly behind the sight so we can see through it?

[doc_Zox]

with both eyes open,
red dots will function with the front lens cap closed...

the feed neck may appear to block the lower part of the lens
but it prolly still puts the reddot of death [TM] out there

[captian pinky]

i dont see the gun or the trigger ? i dont see it

just kidding guys that looks like the heaviest mag ever
he has more do hickies than gun haha but cool :D

[DeVioSiTY]

And I thought I was done with upgrades after just purchasing a ULE warp body, warp feed, xvalve and intelliframe. I guess it's time for the scenario route with a mag based off of this body. It's nice to know AGD is back in the saddle again.

[LONEWOLFOO1]

can they make a adapter that looks like this.

http://www.midsouthshooterssupply.com/product_images/080-17015.jpg

[borph]

the feed neck may appear to block the lower part of the lens
Looks like the 90 degree adapter blocks both the lower and left sides. Any blind spot in the sight picture would be a distraction IMHO.

[nate2k191]

just mount sven's gun on the back of a jeep, on a tank, or in a bunker. its an e-tac so it would make a great turret, especially if he got x-mod. :shooting:

congrats on making a BA tac-mag man. its great.

[svenneves]

ok just weighed my mag... its only 7lb, it used to be 12lb but i juse a remote now lol.
The 90deg does slightly block the left and lower side of the site but (for those old schoolers) if you are used to looking around a powerfeed, the 90deg blocks much less then the old powerfeeds did. also there is plenty of room to mount a sight center or on all 3 rails.


I havent looked around lately, how is the xmod coming?

[Maggot6]

I havent looked around lately, how is the xmod coming?

..The xmod has "come"...

http://www.niedtech.com/

[doc_Zox]

kinda limiting not having a rail inline with the side port

i could see a whole lot of cool mod possibilities with a side mounted stick mag /qbow

http://tinypic.com/jgoz6v.jpg