Hyper frame good or bad for Classic valve?

[Nutsnyomowf]

Hey can any of you guys tell me the benefit of a CF hyper frame on a classic valve.Dont have the money yet to get a Xvalve

[buzzboy]

It really isn't a problem as long as you don't shoot over like 15 bps and you use HPA. Also I have read that it is better to use it with the supplied hyperframe on/off.

[SpitFire1299]

ULT is lighter though.. and i think even centerflag recommends it over theirs, because the hyperframe was pre-ult (I believe, correct me if im wrong).

[hitech]

ULT should be better. And I made a vid of a classic valve shooting paint at 20bps fullauto, so I think it works just fine. :D

[Nutsnyomowf]

ULT should be better. And I made a vid of a classic valve shooting paint at 20bps fullauto, so I think it works just fine. :D

can you link the vid?

[hitech]

Not at the moment. I could email them to you (about 3.5 megs each, 2 files). Send me a PM with your email address if you want me to email them to you.

[Arstron]

Not at the moment. I could email them to you (about 3.5 megs each, 2 files). Send me a PM with your email address if you want me to email them to you.

email them to randall@arstron.net and ill post them on the net. ;)

[Jaan]

I have one on a classic with the Hyperframe on/off and I'm shooting CO2 with a remote line. It shoots fine.

you have to watch out for the older classic valves since the depth of the on/off hole wasn't drilled to exact specs. If the pin is too short it will chew up the bolt.

[hitech]

email them to randall@arstron.net and ill post them on the net. ;)

The email was rejected. You can try here:

http://briefcase.yahoo.com/bc/larrydela@sbcglobal.net/lst?.dir=/Hosting&.view=l

[Beemer]

You can try here:

http://briefcase.yahoo.com/bc/larrydela@sbcglobal.net/lst?.dir=/Hosting&.view=l


Good job Hitech. Thanks I missed em last time around. So good, here they are again.

http://home.comcast.net/~beemerone/HitechHyper1.avi
http://home.comcast.net/~beemerone/HitechHyper2.avi

What reg and output is that at? Looks all OEM rail, body, valve. What bolt, on/off?

:rofl: and thats a Classic Valve :ninja: But dont tell no one :sleeping: :spit_take

Peace Out

____________
http://home.comcast.net/~beemerone/AoIL.gif

[hitech]

That is a stock minimag. The tank is a preset PMI 68/3K. It has a level 10 bolt with the short spring (the middle & long spring will not work). The on/off is the centerflag on/off with their "long" pin.

:cheers:

[Dubstar112]

http://www.geocities.com/jibbinfatboy/Leftview.jpg

Mine ran flawless for quite some time. Flatline HPA and warpfeed with classic valve and I was never disappointed.

[Beemer]

That is a stock minimag. The tank is a preset PMI 68/3K. :cheers:

Preset to what?

[buzzboy]

I'm pretty sure PMI tanks are preset to about 800.

[hitech]

Preset to what?
I've never measured it, but it should be around 800psi.

[Beemer]

That is a stock minimag. The on/off is the centerflag on/off with their "long" pin.:cheers:


Hmmmm, Any chance you could tell me how long that pin is please. :argh:

[Asym]

PMI tanks are supposed to be preset to 850.

I run a spydermag conversion with ULT and love it. Its got level 10 and is fairly efficenet. Last weekend I went to a big game and was able to get slightly over 1000 shots per 68ci 3k fill. Since its a classic I can also shoot deeper into the tank, I can keep shooting untill the tank pressure is under 500PSI without any noticable shootdown. I've only pushed it to 16bps since I know my loader can do that and I don't really need anything faster.

[hitech]

Hmmmm, Any chance you could tell me how long that pin is please. :argh:

I'll try to dig up a mic and measure it.

[flyingpootang]

WoW the video is sick. I can't believe I spent 225 on a Xvalve for my Karta and Hyperframe when I could have used a Classic valve.....

[Kschroede]

yeah that pin length would be amazing hahah

[SpitFire1299]

The xvalve is lighter, has level 10, more consistant, and just all around better. Also its much more cool. :D