Type of lube

[mcclare]

I've searched through the forums and most people seem to suggest KC oil. The store around me only sells Extreme rage oil, DOW33, and love juice. Would any of these be ok for it or should I just order some KC?

[shades]

Pnuematic tool oil it is about $3 a quart it will work fine and you will never have to buy oil again. It is most likely what this speciality oils are any ways. I use 3in1 oil after recommed to by a tech.

[sisco87]

Pnuematic tool oil it is about $3 a quart it will work fine and you will never have to buy oil again. It is most likely what this speciality oils are any ways. I use 3in1 oil after recommed to by a tech.
Are you referring that regular tool oil will work ok for just mags? or is it ok to use in all guns?, like an angel for an example, since that what i have.

[egb groupie]

I&ISports.com

[b e n]

3.99 Air tool oil is where its at baby :cool: Thats what I have used on my Tippy, Mag, Matrix, Pumps, And Cocker for over a year and it still hasent run out or given me problems. :)

[athomas]

I've been using both Lubriplate or Snap-on air tool oil for about 13 years in my mags and have never had a problem. Most of my orings have lasted for many years between changes.

[LuisV]

KC Oils are the best around...

http://www.automags.org/forums/showthread.php?t=191517

[REDRT]

I've been using KC oil for a decade or better. Anyway It has always been very good to me. Never had I had any problems lube wise with it. My o-rings last longer by what I read here on the tech forum. I truely believe it is a cut above most. Something like KC is easy to recommend because it is just that good...

[JRingold]

I've use Air Tool oil, and Gold Cup. I switched to KC last year and have never had a better shooting marker. The o-rings seem to stay clean and there isn't any black residue that I used to get on the bolt and springs anymore.