Sneak Peek

[BigEvil]

First pick of my home made E-frame.

Specs
9v operation (battery in battery pack)
AGD I-Frame
TAG NME Predator board
magnetic trigger return
electro pneumatic operation.
Soon to have blue laser eyes :-)

Im also planning on cutting down the battery pack and making it a little smaller

http://www.bigevilonline.com/modules/coppermine/albums/userpics/10002/normal_MyEFrame.JPG


Ive only been dry firing it so far, but it looks to be a BEAST. Believe it or not, I have some trouble shooting it on SEMI mode. I think I need a heavier micro-switch for the trigger. All of the other modes rip.

More to come...

[AGDlover]

VIDS VIDS VIDS!!!!! looks killer Scott!!!!

[A-Tach-One]

Now that's what I'm talkin about. Your a busy guy aren't ya? You'll have to let us know after a day of use how it was, and great job. - Eric

[BigEvil]

Now that's what I'm talkin about. Your a busy guy aren't ya? You'll have to let us know after a day of use how it was, and great job. - Eric

Thanks.

If I get a change I will take a video if it.

[Rudz]

how is the battery pack connected to the rail..that was the problem when i thougt of a project similar to this..and i still say an mp3 player will fit in the pack..

[captian pinky]

i can answer that hey used a shadow rail i believe it comes looking like the emag rails only lighter

[BigEvil]

i can answer that hey used a shadow rail i believe it comes looking like the emag rails only lighter


Recondo rail and a crude adaptor for the battery pack :-)

[Rudz]

Recondo rail and a crude adaptor for the battery pack :-)


yeah my plan was to have luke hook something up..i like yours though..i wanna see this thing when u get ur board

[BigEvil]

yeah my plan was to have luke hook something up..i like yours though..i wanna see this thing when u get ur board


I got a board, I ended up using a Predator NME board. Screwed up my whole layout. Notice the little white button right under the blue LED on the grip? What a PINTA to come up with that.

[BigEvil]

Vids (jayloo, so you have to be logged on)

http://www.jayloo.com/videos/show_vid/2518.html

http://www.jayloo.com/videos/show_vid/2517.html

I realized that with this board, in order to get it to shoot decent on SEMI I have to have the debounce at its lowest setting. Also since the eyes arent connected, it will shoot much faster with the eyes turned 'off'.

The clip with the blinking red led is the one with it off, the other is the same mode and rof but the non-connected eyes 'on'

[b e n]

Nice, how hard was it to make?

[Remington]

Lookin' good BigEvil; I'm loving the LED in the grip! :hail:

But I gotta ask: Is that legal? ;)

[BigEvil]

Lookin' good BigEvil; I'm loving the LED in the grip! :hail:

But I gotta ask: Is that legal? ;)

No one in their right mind would shoot that fast in a game. Unless they are loaded with dough like A-Tac-one is and can afford 8 cases of paint a day :-)

I usually keep my Xmod'd Xmag on 15-17 bps and NXL mode during play. This thing, I dont know until I get the eyes done and see what its capable of.


And to answer Ben's question, I would never try to make another one without a Mill. These AGD parts are just way too tough to dremel meat off of.

The design is simple though... switch - controller board - battery - noid - and in this case a LPR and ram. Basically what every other gun has.

What I like about this over my emags, is the fact that the cycle rate is not as dependent on the input pressure.

[m-a-r-k-7]

Very impressive.

Took me a while to get it at first, but now I'm pretty sure I have the inner workings figured out.

[tae]

I like the whistling.

Very, very nice. Got any pics of the guts?

[BigEvil]

I like the whistling.

Very, very nice. Got any pics of the guts?

Im going to put some up this weekend.

This is the Noid (http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=SMC-SY113A-SG-PM3&Category_Code=SOLENOIDS) Im using.

Predator NME board, and a Clipard MPA3 with a riv nut ram.

[Dark Frost17]

To Bad I Dont Have A Mill.....

[BigEvil]

To Bad I Dont Have A Mill.....

If you have a dremel, about 30 reinforced cutting disks, a drill press, a good assortment of bits and taps, and patience, you too can make one.

;)

[Arstron]

I have been planning on doing somthing very similar to this... Only I have a set of emag lowers with NO electronics at all in it.... :argh:

[captian pinky]

can you please post pics of inside

[BigEvil]

can you please post pics of inside

More pics and details on my website

http://www.bigevilonline.com/modules.php?name=Forums&file=viewtopic&p=8&sid=c346cbcc1d7253b760340102400ba75d#8

and a new video at Jayloo
http://www.jayloo.com/videos/show_vid/2519.html

:dance:

[tae]

:hail:

Thats one rocking Mag! Hope ya get the "semi issue" fixed.

[Rudz]

teh hotness..and scot..i joined your board!!


sig!!!


http://img81.imageshack.us/img81/4489/aobaseball8bh.jpg

[BigEvil]

:hail:

Thats one rocking Mag! Hope ya get the "semi issue" fixed.

Yeah I kinda of figured that out. When on SEMI I have to turn the debounce all the way down to 1 and it seems to work fine.


Rudz, that should be an Ultra Light Engeneered bat, this is AO.

[BigEvil]

Updates pics that people were asking for are now up on my site


http://www.bigevilonline.com/module...40102400ba75d#8

[going_home]

I love those System X grips.
Dont know why they havent caught on too well.
Got a set for each of the UMF frames I have.

Hey boss (he says showing ignorance) whats the black thingy
on the right side of the marker coming out of the Xvalve ?

[BigEvil]

I love those System X grips.
Dont know why they havent caught on too well.
Got a set for each of the UMF frames I have.

Hey boss (he says showing ignorance) whats the black thingy
on the right side of the marker coming out of the Xvalve ?

Micro Rock Low Pressure Reg. You need to drop the air pressure going into the solenoid to under 100psi for it to work and now blow up :-)

Its essensially the same thing every other electro-pnuematic guns has. Timmies, Trix, Imps, ect have them sticking out of the front. (And maybe not Micro-Rocks, but basically the same thing)

[BigEvil]

Here is the link to a FAQ I am working on. Seems like alot of people have questions.
:cheers:
http://www.bigevilonline.com/modules.php?name=Forums&file=viewtopic&t=24&sid=b383901ffcf5128195e495069529aa77

BTW, im thinking Im going to call it the "Hellrazor" Wadda ya think?

[wjr]

I have a question. Where did you buy the "T" fitting? I'm talking about the one that goes from the valve to the lpr and macroline fitting. I'm interested in using the same one a pneumag that I'm constructing.

[BigEvil]

I have a question. Where did you buy the "T" fitting? I'm talking about the one that goes from the valve to the lpr and macroline fitting. I'm interested in using the same one a pneumag that I'm constructing.

Mcmaster carr. They have a bunch of EVERYTHING. I even picked up some really nice T fittings that are stainless steal and cost $13 a peice. Theu were too short to let the LPR clear the body of the gun. Luckily, I also picked up those brass ones. I think they were about $5 a pop.

[Toll]

Excellent work. Makes me wish I knew more about this kind of stuff.

[BigEvil]

Excellent work. Makes me wish I knew more about this kind of stuff.


Everything I know about this stuff I learned on AO. Its all out there. :D

[BigEvil]

IT CAN SEE!!

I just got the body and rail back from Luke for eye milling, and the battery pack for a little cosmetic enhancement.. I put everything back together and viola!

http://www.bigevilonline.com/modules/coppermine/albums/userpics/10002/normal_IMG_2322.JPG

http://www.bigevilonline.com/modules/coppermine/albums/userpics/10002/normal_IMG_2324.JPG

http://www.bigevilonline.com/modules/coppermine/albums/userpics/10002/normal_IMG_2321.JPG

[m-a-r-k-7]

That looks very nice, I love the lazer eyes.

[surfbum]

that is truely f-ing sweet
what eye covers did you use?

[BigEvil]

that is truely f-ing sweet
what eye covers did you use?


The E-blade like ones that TAG sells. I cut them down, and the one on the detent side I had to cut a semi-circle in to accomodate it.