*** Fireblade Customs ***

[RRfireblade]

If it can be imagined , it can be realized......

Imagination included at no additional charge.

Not currently taking in work.

How I'm going to handle this since my PM box fills up in like 2 minutes is ..... Please send questions and pricing inquiries to :

Jay@FirebladeCustoms.Com

FirebladeCustoms@Yahoo.Com

I'll answer questions and such here and post pics and other requests. Beyond that , email me with details and I'll put together a price quote.

I'm either experienced or authorized to work on (and in most cases adealer for) pretty much every major manufacturer so feel free to ask about anything other than AGD products.

Below are just a few examples of work that I happen to have pics for. Anything from ground up customs , to scratch built complete markers and anything in between. Tuning , setup , programming whatever.

I will 'estimate' turn around on most basic work to be 2-3 weeks from when I recieve it ,that doesn't include anno. Anno I send out and won't take responsibility for on time frames. More complex jobs I will estimate based on the job.

Oh , and FYI.....at this time will not take Anno only jobs. I'm not an annodizer.

So , that's it in a nutshell. Anything else you need to know.....ask and we'll see how this goes.

Complete Customs
http://premium1.uploadit.org/rrfireblade/Paintball/Emag-RR.jpg
Grip Frame Dovetails
http://premium1.uploadit.org/rrfireblade/Paintball/Emag-Dovetail-3.jpg
Can be done on many manufacturers
http://premium1.uploadit.org/rrfireblade/Paintball/Emag-Dovetail.jpg
Dual Detents
http://premium1.uploadit.org/rrfireblade/Paintball/ULE-Dual-4.jpg
Minor impact on Anno
http://premium1.uploadit.org/rrfireblade/Paintball/ULE-Dual-3.jpg
Cosmetic Milling of all kinds
http://premium1.uploadit.org/rrfireblade/Paintball/Tank-011.jpg
XMAG Clamping FeedNeck Mods
http://premium1.uploadit.org/rrfireblade/Paintball/XMAGBreachMod.jpg
Custom Triggers
http://premium1.uploadit.org/rrfireblade/Paintball/Scythe-Ripoff.jpg http://premium1.uploadit.org/rrfireblade/Paintball/Tank-012.jpg
Custom Accessories
http://premium1.uploadit.org/rrfireblade/Paintball/15MicroMagASA.jpg

[RRfireblade]

ULEing of various degrees
http://premium1.uploadit.org/rrfireblade/Paintball/ULE-Rail-Milling.jpg
Some one say ULE ?
http://premium1.uploadit.org/rrfireblade/SCKarni/SCKarni.jpg
Dovetail Detail
http://premium1.uploadit.org/rrfireblade/Paintball/Emag-Dovetail-4.jpg
Limited only by Imagination
http://premium1.uploadit.org/rrfireblade/Paintball/LadyTrigger.jpg
It's the details that set it apart
http://img.photobucket.com/albums/v440/maglover728/micromag3.jpg
Minor massaging
http://premium1.uploadit.org/rrfireblade/Paintball/ULEFrame2.jpg
Custom Conversions
http://premium1.uploadit.org/rrfireblade/SCKarni/SC-Karnivore-001.jpg
SC Feeds
http://premium1.uploadit.org/rrfireblade/SCKarni/SC-Karnivore-012.jpg
Scratch builts
http://premium1.uploadit.org/rrfireblade/ColMustard/NewMustard-006.jpg
Cool Carbon Stuff
http://premium1.uploadit.org/rrfireblade/ColMustard/NewMustard-014.jpg

[RRfireblade]

Prototyping , R&D
http://premium1.uploadit.org/rrfireblade/Paintball/Pneumag-006.jpg
Product Innovation
http://i16.photobucket.com/albums/b1/RRfireblade/ColMustard011.jpg
Various Material Choices
http://i16.photobucket.com/albums/b1/RRfireblade/ColMustard013.jpg
Complete Intregation
http://i16.photobucket.com/albums/b1/RRfireblade/ColMustard016.jpg

Pump Kits (Undercocking)
http://premium1.uploadit.org/rrfireblade/Paintball/UnderPump-003.jpg
http://premium1.uploadit.org/rrfireblade/Paintball/UnderPump-002.jpg

Pump kits (Integrated)
http://premium1.uploadit.org/rrfireblade/Paintball/PhantomOfDoom-011.jpg
http://premium1.uploadit.org/rrfireblade/Paintball/PhantomOfDoom-007.jpg

Other
http://premium1.uploadit.org/rrfireblade/Paintball/BlackMagic2.jpg


More Details soon....

[surfbum]

dude
that is some seriously nice work
:hail: :hail: :hail:

i am kinda at a loss of words

[AGDlover]

RR I need a trigger that needs to be made for my Bushy(BM5) PM me for details

[A-Tach-One]

Great stuff Jay, really glad to see you doing this custom stuff. Now WTF kind of trigger did you create in pic laying on the CnC pack? Ah I see it now that the pic is enlarged. :D Need to find myseld a stalk to you can mill her up like that one :cheers:

[SpitFire1299]

As stated before..


:hail: AWESOME. :hail:

[SpecialBlend2786]

Sooooooooooooooooooo is this for JUST AGD markers?

EDIT: serves me right for not waiting till the pics loaded. nvm :wow:

[Dark Frost17]

wow..... :headbang: :hail:
nothing more to say........ :eek:
buty a eblade on a pump is a little crazy :wow:

[LinearGoose]

:clap: :clap: :clap:
Man now I cant wait till I finish my design for my rail. It would be an honor if you could mill it for me too. You really done some nice work.

[Rudz]

beautiful work.im amazed..will you be selling cnc battery packs??

[cowboy_00]

Very interested in a sythe type trigger. PM me if you wanna talk about it.

[kingpen509]

That rail on that e-mag is sick! I will give you 1,000,000.00 for that marker LMK!

[BREAD_DA_PAINTER]

thats stuff is great :hail: :hail: .... pm me a price for the lady trigger and lady drop( wiil clear a 88/45??), polished or raw ever how it comes.... i have a nickeled RT Pro.... :bounce: :cheers: :cheers:

[m-a-r-k-7]

You sir are amazing!

[mstrdbz]

I've got an x mag breach I would love to have converted to clamping, shoot me a pm with a price. Thanks!

[nevets11_2003]

theres a pneumag in there...
does this mean you will be doing pnuemag conversions

[nevets11_2003]

can you also do clamping feedneck conversions to a micro mags?

[bunny5]

RRfireblade: Nice work. You recently did a fantastic job on my SFL clamping feedtube. Now i'm looking for some milling/custom work.


Front End milled down
Trigger Guard milling(front and rear)
Trigger frame bumps
Dovetail style gripframe
Custom Trigger


Here is a rough sketch of my idea.
http://www.jayloo.com/files/pics/37000/custom_sfl.jpg


PM me the price when you have the time.

-Rob

[RRfireblade]

Thanks for all the interest guys , when I get a few more things in order and can be confident in offering consistant and reliable turnaround I will post responses and pricing on a number of things.

Thanks so much ,

Jay.

[psychowarden]

Im considering the Clamping feeneck mod for the X-mag...I would like to get my X-mag fixed first though.

[Dark Frost17]

i didnt know you did all of that..... :tard:
i will be waiting for details :cheers:

[Warwitch]

Absolutely stunning. Im in the market for a custom, ground up mag.

[SummaryJudgement]

I'm going to end up giving you soooo much money :cry:

[Rudz]

im gettin am xmag now..how much for the ccm clamp mod?? and i so want a custom trigger :hail: :hail:

[Chaos_Theory!]

Subscribed lol

[AGDlover]

PMed you about an idea

[Chaos_Theory!]

Are there a lot of areas on an Xmag you could remove weight from w/o making the marker look odd?

Also, where did you have that Karni anod at?

[mobsterboy]

PMed you about an idea

as did i. Did you get a response AGDLover?

[DemonBunnyMan]

:D oh yes...

[RRfireblade]

as did i. Did you get a response AGDLover?


Thanks for all of your interset ,I'm sure I'll be able to work with each of you. Right now my PMs are slammed so by about monday I'll start to respond to work and pricing questions. I've refrained from doing so till I can be sure I can stand behind my responses. Just hang in there for a few more days and I'll do my best to get to everyones requests.

Thanks again for all the interest and kind words , I appreciate it greatly. :)

Jay.

[DemonBunnyMan]

Hey Jay lol I got work for yah just lemme know when you plate is free.

[Dark Frost17]

Thanks for all of your interset ,I'm sure I'll be able to work with each of you. Right now my PMs are slammed so by about monday I'll start to respond to work and pricing questions. I've refrained from doing so till I can be sure I can stand behind my responses. Just hang in there for a few more days and I'll do my best to get to everyones requests.

Thanks again for all the interest and kind words , I appreciate it greatly. :)

Jay.
i can wait...... :headbang:
wouldent want any 1 to be overloaded.... :D

[maglover728]

Jay, where have you been? I am glad to see you still involved with custom work. Thanks again for the work my my MicroMag.

[RRfireblade]

Jay, where have you been? I am glad to see you still involved with custom work. Thanks again for the work my my MicroMag.

Needed a break from the business. Didn't really get one but it was something. Been in it to long to stay away though.....

:)

[RRfireblade]

UPDATE ! ! !




Now taking in work.

How I'm going to handle this since my PM box fills up in like 2 minutes ..... Please send questions and pricing inquiries to :

FirebladeCustoms@Yahoo.Com

I'll answer questions and such here and post pics and other requests. Beyond that , email me with details and I'll put together a price quote.

I'm either experienced or authorized (or in most cases a Dealer for) to work on pretty much every major manufacturer so feel free to ask about anything other than AGD products.

Below are just a few examples of work that I happen to have pics for. Anything from ground up customs , to scratch built complete markers and anything in between. Tuning , setup , programming whatever.

I will 'estimate' turn around on most basic work to be 2 weeks from when I recieve it ,that doesn't include anno. Anno I send out and won't take responsibility for on time frames. More complex jobs I will estimate based on the job.

Oh , and FYI.....at this time will not take Anno only jobs. I'm not an annodizer.

So , that's it in a nutshell. Anything else you need to know.....ask and we'll see how this goes.

[Chaos_Theory!]

So who did the ano on that karni? I asked but i dont think you ever gave me an answer.

[RRfireblade]

Max Anno... before they shut down. :(

[WenULiVeUdiE]

Hmmm, I may have some ideas brewing for my Viking...Possibly some cosmetic milling....I still remember when you helped me with a paper on machining. I guess it's time to return the favor. ;)

Nice to see you are back in paintball....sort of. Good luck with this endeavor.
Now it's time for some Jello!

[RRfireblade]

RR I need a trigger that needs to be made for my Bushy(BM5) PM me for details


Send me an email with some idea of what you have in mind and we can go from there. :)

Thanks.

[RRfireblade]

beautiful work.im amazed..will you be selling cnc battery packs??


Custom Milling them sure but I won't precisely copy AGDs design. And not mass resale though , only as per request. :)

[RRfireblade]

That rail on that e-mag is sick! I will give you 1,000,000.00 for that marker LMK!


I'll take a cashiers check or M.O.

Thanks for doing business. :D

[RRfireblade]

thats stuff is great :hail: :hail: .... pm me a price for the lady trigger and lady drop( wiil clear a 88/45??), polished or raw ever how it comes.... i have a nickeled RT Pro.... :bounce: :cheers: :cheers:

That's pricey all hand work. If your serious , shoot me an email.

Thanks.

[RRfireblade]

Are there a lot of areas on an Xmag you could remove weight from w/o making the marker look odd?



Depends on if you still want it to look like an Xmag. :)

There's not a whole lot of excess there due to the breach design and such. Everything else left there is why it looks like an Xmag.

[RRfireblade]

Bunny5:


Glad your hapy with the SFL. Do me a huge favor and forward that post to my email , as fast as my PMs fill up theres no way I can keep track of everyone and everything here. I'll send you a quote from there.

Thanks Rob.

[LinearGoose]

What type of rail do you perfer when you make a custom rail? Also what kind of rail is on that Emag in the first post?
Edit: I know you coustom milled it but what was it originally?

[RRfireblade]

That one is a stock Emag rail. Those and Tac rails have the most meat on them and 'in' them for milling. The ULE'd rails are pretty hollow so you can't really do much milling with depth.

[Dark Frost17]

are there any rails with out screw holes in the sides that i can have milled down like the first?

[hipster]

quick question
provided the tag mag board arrives soon I have some custom eye covers and am looking for someone to do the milling on the karta body to bring it all together would this be a task you might be interested in,
im pretty sure you would find there will be more people looking for bb eye milling if you interested

[Krazy Ivan]

Had a quick question on cost of a custom trigger, relatively easy trigger, but needs a stop screw threaded for a old intelli on my backup mag.

Also looking to lighten up that raid significantly and curious of how much can be chopped out, and any styling that could be easily done. I'll try and catch you on AIM.

[Dark Frost17]

Can you make feed tubes for pumps? but angel threaded for ule body ? :confused:

[StygShore]

Some of the pic links are dead, and not getting any response back from Yahoo email address.

Did you change your mind about doing custom work?


Styg

[RRfireblade]

Styg:

I sent a reply , about the Xmag right ?

I'll go check and send it again.

Not sure about the pics , seems like the ones on Uploadit servers. They must be done today or something.

Dark:


I'm not yet set up for threading feednecks so it'd have to be built off and existing neck or an angel threaded warp feed neck if you can track one down.

Krazy :

Not sure if the email I got was from you that I replied too. I fnot shoot me one over there and we'll talk details. Thanks.

hipster :

Sure thing.


Sorry if I missed anyone , I don't always get my email notifications from this board.

Thanks to all for your interest as well. :)

[StygShore]

hmmmm no email from you.... kinda odd....

Can you forward that email to Stygshore@comcast.net and see if it gets here or not?


Styg

[RRfireblade]

Sent ;)

[StygShore]

received


Styg

and responded too

[etjoyride]

When i get back from camp i'm going to have some work for you :)


...and money

[DemonBunnyMan]

Ahy jay just a rough idea here.Custome CNC pack for a mag with a personal logo with text in the milling.both sides rough idea of $$?

[StygShore]

After the novel of work I wrote requesting last night, I may have him booked for a month or so :)


Styg

[RRfireblade]

Ahy jay just a rough idea here.Custome CNC pack for a mag with a personal logo with text in the milling.both sides rough idea of $$?


$50-$75 ballpark-ish , as a wild guess without details. ;)

[RRfireblade]

After the novel of work I wrote requesting last night, I may have him booked for a month or so :)


Styg


No doubt ..... I'm still reading it. :D

[StygShore]

Last gun I ever plan on owning unless technology drastically changes and it wont work anymore!! Might as well personalize it and make it my own, completely distinguishable from anyone elses.

Was thinking.... red Lexan sheets inside the battery pack, and mill through the outside of the pack? Would that be possible you think, or not enough room in the battery pack for the Lexan?


Styg

[RRfireblade]

I belive there would be some room for a thin sheet.

[StygShore]

That opens things up to some other alternatives if PK can not do the graphics for me....


Styg

[stoupa]

Hi, Jay, how much would you charge for machining a custom rightfeed Micromag body?

[RRfireblade]

Depends on exactly what you want done. Shoot me an email with some details.

Thanks.

[Chaos_Theory!]

How much would it cost to have a battery housing with a design milled into it? I want the AO honey comb logo milled into both sides of one.

[sean33]

RRfireblade: Nice work. You recently did a fantastic job on my SFL clamping feedtube. Now i'm looking for some milling/custom work.


Front End milled down
Trigger Guard milling(front and rear)
Trigger frame bumps
Dovetail style gripframe
Custom Trigger


Here is a rough sketch of my idea.
http://www.jayloo.com/files/pics/37000/custom_sfl.jpg


PM me the price when you have the time.

-Rob
NICE! can you tell me how much for that exact trigger? same color cuz my x-mag is black and that would look really nice... can you also respond via PM? thx good work

[psychowarden]

How much are you charging for the X-mag clamping feedneck mod. Is it only with CCM feednecks, or can we choose a different type? And what threads do you tap the breech for?

Thanks, and keep up the good work.

[spacedtedybear]

Can you make delrin bolt pins for AKA markers?

[SpitFire1299]

Email sent! :cheers:

[dj89]

How much are you charging for the X-mag clamping feedneck mod. Is it only with CCM feednecks, or can we choose a different type? And what threads do you tap the breech for?


Thanks, and keep up the good work.
He dose not make any threads, but it may be able to use another feedneck, but it would need to be a mid or high rise.

[personman]

I hate to bother you/clutter up your thread but you didnt respond to my email and I'm a little worried now. Did you even get my ygrip? I havent heard a single thing from you since you told me to send it to you..
A little update would be nice :)
Thanks
Adam

[RRfireblade]

I hate to bother you/clutter up your thread but you didnt respond to my email and I'm a little worried now. Did you even get my ygrip? I havent heard a single thing from you since you told me to send it to you..
A little update would be nice :)
Thanks
Adam


Yes I did recieve it.

Here's an update for everyone along with an appology.

I just got back from out of state dealing with a family emergency which cost me at least a week worth of time on the machines. :(

In addition to that , I apparently way under estimated the demand for my services (pretty hard to complain about that tho huh. :D ) and have had WAY too much work show up. I've been trying to knock it out in the order in which work showed up on my door step but in a nut shell , that ain't cutting it by a long shot. So....

I'm behind......a tad. ;)

This week I will do my best to catch up and get everyone back on track. If I haven't yet (there are like 200+) responded to your email I will in the next day or so and get everyone an update and ETA on thier work , to the best of my ability.

Again , I appologize. I just didn't prepare properly for the amount of work I took in and will not let that happen again.


Lastly ,

Until I get caught up and post so here , I'm going to hold off on any more incoming work.

Thanks for all your patience and understanding.

Jay.

Fireblade Customs.

[personman]

In that case, I'm sorry to hear that and I hope everything is okay.

[spwz99]

Could you possibly post a rough pricing guide for common milling jobs or the like in this thread? I don't want to waste your time if its gonna be out of my budget. Thanks.

[ShotOnSight]

just shot you an e-mail :clap:

[vivalamexico]

sorry to hear about your troubles.... continue to take your time on my reply haha! just dont totally forget about me like fireball mountain did.. **gripes about cocker body in milling limbo for almost 2 years**

[kruger]

I would be interested in the Xmag clamping feed neck mod. Also some battery pack work. Just PM or post in this thread when you are accepting new work.

[personman]

I got my y grip ULE'd by Jay and I'm pretty happy with it.
Thanks :)

[smoothballs825]

hm would it be to mill the extra metal off of my gripframe, and to mill the battery pack like it is in the first pic? both to have in gloss black anno.

[RRfireblade]

Just an update.

Probably 2-3 weeks from opening the doors to the Chocolate factory again. ;)

Thanks everyone.

[SummaryJudgement]

Just an update.

Probably 2-3 weeks from opening the doors to the Chocolate factory again. ;)

Thanks everyone.

Well, it's been eight days, so let's give it a shot...........


RRfireblade, I really want one OR two of those rails with the windows all the way through! When can I order some?

Thank ChronoBreak and Luke for pointing me in your direction (I couldn't find this thread to save my life).

I have a Spacemag frame I want to put it on and another project gun I'm considering it for.

Let me know when you know, ya know? :D

Thanks!

[RRfireblade]

:)

Well , getting caught up some.

As for your question , I'm not planning one selling rails outright. That milling needs to be done on 'non' ULE rails and I just don't have a big supply myself. If you can supply the rails we can go from there.

Thanks a bunch.

Jay.

[Pneumagger]

ok... How much for a custom vert feed body for a hammer pump? And possibly a lexan pump armature?

[Mayzons]

How much to mill a emag battery pack like the pic of the one you posted?

[RRfireblade]

Alrighty , gonna take a little more work in again.

If you haven't recieved a response on the last couple days then for anyone still needing quotes and such , please try again.


Thanks everyone , ther response has been overwellming to say the least. :headbang:

[thejayare]

On the milled rail mentioned above... You did that using a EMag rail, correct? I liked that too. I might need to send you one!

[slateman]

Do you have a website of some sort? I'm kind of curious, what kind of milling could you do to a ULE body? How about a slug body? Also, can you do any anno or powdercoating?

[RRfireblade]

On the milled rail mentioned above... You did that using a EMag rail, correct? I liked that too. I might need to send you one!

Yes, an un-ULE stock rail it must be.


Do you have a website of some sort? I'm kind of curious, what kind of milling could you do to a ULE body? How about a slug body? Also, can you do any anno or powdercoating?

No website , I'm already getting more work than I can handle as a one man part time operation with just a couple of threads posted here and there.

The ULE is just a tube so your options or basically cuting it down or adding a window.

Slug bodies are pretty much a blank canvas , my biggest restriction is I'm only using manual machines so I don't really do 3D complex curves and shapes. I can to a cerain degreee but it's limited.

I also don't do any in house anno so except on full customs or rare exceptions , I try not to be that middle man on that. There are just to many ways to upset a customer in that kind of relationship. :)

[slateman]

Could you engrave or mill emblems onto an Emag battery pack? I'm thinking of like the Redskins logo . . .

[RRfireblade]

Doors closed again for now , man it doesn't take long to get a couple months backed up. :(

[JaKaL]

At least you're good about not taking on too much more than you can handle and getting craploads of people pissed off at you like SOME OTHER online airsmiths... :)

[Fish]

Will a classic RT Rail work in stead of a non-ULE'd e-mag rail, to make the one like in your first picture? It is for an E-Mag, and I would like some minor changes done compared to the one in the pic. I know you are backed up, but I am not in a rush, so LMK when you get time.

Thanks

[just a karni]

what will an undercocking kit and stock class feed run me

[RRfireblade]

Will a classic RT Rail work in stead of a non-ULE'd e-mag rail, to make the one like in your first picture? It is for an E-Mag, and I would like some minor changes done compared to the one in the pic. I know you are backed up, but I am not in a rush, so LMK when you get time.

Thanks

Yea, pretty much. Just can't be ULED inside.

[RRfireblade]

what will an undercocking kit and stock class feed run me

For what marker ?

[fastev]

what will an undercocking kit and stock class feed run me
I'm interested in a Phantom undercocking kit. Are you able to do custom barrels? I have an idea I'd love to see come to happen, but I don't have the means of doing it myself...

[Warwitch]

Any chance you could post up some pics of the work you have been doing? Small stuff, big projects, whatever. Always looking for new ideas :clap:

[RRfireblade]

Any chance you could post up some pics of the work you have been doing? Small stuff, big projects, whatever. Always looking for new ideas :clap:


I'll add a few new things up front , guess I shoulda held a few more posts on page one. :D

The Phantom stuff is new. I really don't like to post pics of customers guns , I don't like to steal their thunder. They should get to show it off as thier own IMO.

[RRfireblade]

I'm interested in a Phantom undercocking kit. Are you able to do custom barrels? I have an idea I'd love to see come to happen, but I don't have the means of doing it myself...

I can build complete barrels from scratch I just don't often anymore cause I'm not as close to where those machines are as I used to be. :) I can but only at my convenience.

I also can do a variety of rifling and such for those who like that as well.

[just a karni]

For what marker ?

i want the stock class feed on a custom gun im building i dont know how well it will work yet and an undercocking kit for a phantom

[Warwitch]

I'll add a few new things up front , guess I shoulda held a few more posts on page one. :D

The Phantom stuff is new. I really don't like to post pics of customers guns , I don't like to steal their thunder. They should get to show it off as thier own IMO.


I agree, although you dont have a website so this is your best advertising outlet!$$ You know we love to see whats new and hot!

[Empyreal Rogue]

Bumping and posting here to get an update when FB's taking orders again. :D

[MANN]

Im wondering if you can replace a micro vert feedneck with a clamping one. Maybe tap for angel threads, or set similar to the xmag breeches you do?

[StygShore]

I'll add a few new things up front , guess I shoulda held a few more posts on page one. :D

The Phantom stuff is new. I really don't like to post pics of customers guns , I don't like to steal their thunder. They should get to show it off as thier own IMO.


Get some shots of the split top and scallop underside on My X-Mag to throw up there under the Minor Massaging section of the pictures.

Any progress on it,, or still a pile-o-parts? Can you get me a part number and manufacturer name off of the funky QD I have on there? I want to find out if a shop 2 blocks from my new office carried those or not, they look nicer than the standard ones.

Thanks

Styg

[zazzoo]

hey could you mill a 2 bodies and a rail for a pump for me? also a sc feedneck for a ule
how much would that run me?

[RRfireblade]

Just got back from a long over due vacation , getting back geared up and hopefully fully caught up so . . .

Many of you my be interested to hear that Fireblade Customs and Manufacturing may soon be a full time gig. (fingers crossed)

To everyone who is currently waiting on work to be completed , if you haven't specifically heard from me very recently , I will be getting all but the 'long termers' done in the coming week or so. Then I hope to be open for regular requests and work including product lines branded by Fireblade Customs as well and manufactured and branded for others.

Stay tuned for some pretty cool stuff to come.

Thanks.

[MANN]

Im wondering if you can replace a micro vert feedneck with a clamping one. Maybe tap for angel threads, or set similar to the xmag breeches you do?

No rush, just when you get a chance let me know what you think ^^^

[nevets11_2003]

I know this is over 7 months old but do you plan on taking in anymore work anytime soon?

Sorry im out of it, haven't been around AO in a while