what are good HP regs for the Mag

[PnueMagger]

What are some good vertical regulators for the mag. I want to try to get a good setup I can use with co2 when the need arises. Often actually.

I already know the Palmers Stab is great with co2. How about the Palmers Fatty or CP regs? Any others?

[TheTramp]

The only inline I’d recommend for a Mag is one from Palmer and that’s only if you must use CO2. Both the standard Stabilizer and the Fatty are great at keeping CO2 out. The Fatty has a faster recharge rate so you might want to use that since Mags are very easily starved by inline regs. I don’t suggest trying use a reg to keep liquid out of a RTP style valve since you’ll probably get crazy shoot-down.

[dsrkd]

No need for a reg.
An expansion chamber or remote if you run CO2.

[SpecialBlend2786]

Not sure how good any other reg is other then the Stabilizer when it comes to keeping liquid out of the valve.

Personally, I'd get a good 6 stage expansion chamber and an anti-siphon tank setup. That should be just as good as a Stab. and a whole lot cheaper

[buzzboy]

I would get the female stab and run it to an X chamber. If you want just the reg use the stab not the fatty. The fatty has a max output of like 500.

[Corbet]

If your going to spend $50+ on a reg, please just buy a nitro tank. If you look around enough you can find them for that much, especially new on ebay.

[nixcamic]

If your going to spend $50+ on a reg, please just buy a nitro tank. If you look around enough you can find them for that much, especially new on ebay.

That works if you can find a fill station somewhere.

Is this about running a X-valve off of co2?

[sisco87]

Is this about running a X-valve off of co2?
I wouldn't think so...
cause theres no chance at all you can use co2 on an x :ninja:

[TheTramp]

Well, that's not true but I do agree that it's really not worth the trouble.