PDA

View Full Version : co2?



piperhutch
07-20-2006, 01:42 AM
can you run co2 on a stock 68? just a regular co2 tank?

blamtro
07-20-2006, 01:52 AM
Yes you can. Just make sure you don't get liquid CO2 in the valve by either using an expansion chamber or run your tank off a remote.

piperhutch
07-20-2006, 01:55 AM
thanks :D what will happen if liquid CO2 gets in?

longi
07-20-2006, 04:02 AM
The marker freezes up then you have to wait around for ages for it to thaw out. They run way better on air.

the mag guy
07-20-2006, 07:11 AM
under rapid fire, with co2, you get spyder consistency pretty much. I wasn't pleased with my classic until i got air on it, it improves the mag 100%

glickstue
07-22-2006, 10:21 PM
I ran my classic mag on Co2 for 3 years before I switched to HPA, the differance is like night and day. If you draw liquid CO2 into the Mag's valve it might "hang" or freeze up momentarily untill the liquid converts back to gas. As the liquid converts to gas it creates a pressure spike and the valve becomes supercharged causing a hot shot. :argh:

kevdupuis
07-23-2006, 09:20 AM
If you run CO2, tank on marker also use an antisiphon in the tank this will also help keep liquid out of your mag..

the mag guy
07-24-2006, 03:33 PM
my brother ran a dual expansion chamber before he got air. was weid, but cool. I dont have pics, but imagine a screw in mouned in the vert adapter and then and old expansion that used to screw into the bodies of the old spyders into the bottom of the first one, making an "L". then using steel braided hose to connect the 2nd expansion to the asa.
worked a lot better than I thought it would, but eventually no matter how many expansion chambes you have, rapid fire gets ya.