View Full Version : Tech section sticky?
Chronobreak
07-24-2006, 10:20 AM
well looking at the tech section with the slug cad file, and a few other things i noticed EVERY single one of the links is long dead
http://automags.org/forums/showthread.php?t=73563
so how bout we delete the thread and or possibly replace the link with this
http://haveblue.org/tech/automag/index.html
it not only has the slug cad file, but pump specs and a few other misc tech info/
:dance:
so what do ye say :argh:
Maggot6
07-24-2006, 02:21 PM
Some newer information could work....Go for it, AO needs something interesting to happen to it.
(Heck, I think replacing an autocad file with other cad drawings and a few pictures is interesting ;) )
the mag guy
07-24-2006, 03:11 PM
or if we could make a folder of all the stickies so we dont have to scroll half the page to see the first non sticky. We could even call it the stickie folder. :rofl: sounds kinda dirty tho
nate2k191
07-24-2006, 11:03 PM
we also need to sticky this **exploded view of the X-valve and more (http://www.automags.org/forums/showthread.php?p=2119812#post2119812)** in the tech thread.
SpitFire1299
07-25-2006, 03:26 AM
/\ Agreed! :bounce:
Chronobreak
07-28-2006, 10:02 AM
up
..or somone could just gimme mod powers and i could do it myself.. :rolleyes:
MarkM
07-28-2006, 12:18 PM
we also need to sticky this **exploded view of the X-valve and more (http://www.automags.org/forums/showthread.php?p=2119812#post2119812)** in the tech thread.
Done ;)
Plus cleaned up as well.
I will take a look at what is in the section and the possible creation of a locked forum with the relevant threads...locked as the threads themselves do not need to have 'great post etc' tagged on the replies ;)
MarkM
07-28-2006, 12:25 PM
well looking at the tech section with the slug cad file, and a few other things i noticed EVERY single one of the links is long dead
http://automags.org/forums/showthread.php?t=73563
so how bout we delete the thread and or possibly replace the link with this
http://haveblue.org/tech/automag/index.html
it not only has the slug cad file, but pump specs and a few other misc tech info/
:dance:
so what do ye say :argh:
Also replaced this...well not quite as there is some information in the orginal thread But I have made a new one with the haveblue link above as the information and it is now sticky...but again a closed forum is probably the better way forward for this due to the stickys numbers now getting slightly out of hand.
Chronobreak
07-28-2006, 12:36 PM
thanks Mark,/mods
:cheers:
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.