lost trigger pin...

[wjr]

I lost the pin that holds the trigger in my benchmark frame. Benchmark doesnt have them and I can't find one for the intelliframe in the agd store. Does anyone know where I can get one? I tried one from a spyder... it didn't fit.

[Troen]

the pin or the pin that has screw threads at the end?

[RRfireblade]

Trigger pin ?

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=414&categoryID=92



or Sear pin?

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=406&categoryID=92

[wjr]

http://img85.imageshack.us/img85/2558/newmag3avp0.jpg (http://imageshack.us)


I guess that "trigger pin" is the wrong term. Im talking about the pin that holds the trigger into the frame. I hope that the picture explains it.

[Beemer]

I guess that "trigger pin" is the wrong term. Im talking about the pin that holds the trigger into the frame. I hope that the picture explains it.

Ya you got the name right. These are what you want but not sure if they will fit your frame.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=147&categoryID=24 I think this one should say axle for trig not sear.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=463&categoryID=16

[wjr]

Thanks. Im guessing that it will will fit.

[Asym]

I lost that pin in an intelliframe and went down to Lowes and picked up a steel rod the right diameter and made a new one. Used vice grips to crimp the end so it would stay in, right after I made this I found the original pin. Only minor issue is the original pins are stainless and the steel available at lowes isn't.

[wjr]

I might just head on down to lowes then and get one. Thanks.