Rediculus Full auto mag - possibly over 40CPS

[Pneumagger]

I just took this vid of my own pneumag. It has a nitroduck 800psi preset on it. I tried to goldwave it...but the peaks are so close, that I can't distingush. I had to slow down the playback rate to the minimum and attemted to count the shots. I honestly believe that it is anywhere from 35-40 shot's per second. I counted 10 shots in a .25 second frame.

I uploaded the raw mov file from my digital camera so feel free to help me out with a different goldwave.

http://i53.photobucket.com/albums/g45/jrm33/Black%20Widow/th_100_1562.jpg (http://s53.photobucket.com/albums/g45/jrm33/Black%20Widow/?action=view&current=100_1562.flv)

[geekwarrior]

:eek:

[VFX_Fenix]

:eek: X2

[Troen]

since when have you made pneumags? :rofl:
i mean... :eek:
have you attempted to put paint through it?

[personman]

Full cycles? Probably not.

[minimag03]

this is going to be cool

[ß?µ£ §mµ®ƒ]

Why does it go full auto?

[Pneumagger]

well...I found out why it was rediculous. I couldn't get this behaviour to stop - even with 0 shims in the ULT. I had forgot to put the reg seat and brass disk thing back in the valve. So to answer questions:

They were basically full cycles running pure unregged air. It shot through that 90 cubic inch tank like it wasn't even there. :rofl:

I have fixed the problem and am uploading the semi auto video right now which is still Impressive IMO.

[Pneumagger]

Ok here is the video and GW. It is 15cps sutained. Sorry about the poorer quality, the sound is a bit out of sync with the video for some reason when it uploaded (one reason I like youtube better than photobucket). Also, when i went to shoot lefty, my right hand accidently adjusts the sear stop some and it didn't actuate.

http://i53.photobucket.com/albums/g45/jrm33/Black%20Widow/BlackWidowMag.jpg
http://i53.photobucket.com/albums/g45/jrm33/Black%20Widow/th_Video43.jpg (http://s53.photobucket.com/albums/g45/jrm33/Black%20Widow/?action=view&current=Video43.flv)

[Lohman446]

:) this is going to be fun

[geekwarrior]

:) this is going to be fun

yes it is, I'm getting out my lawnchairs and a six pack

[ß?µ£ §mµ®ƒ]

I love AO

[DevilSpawned]

how do you like that fireblade?

[Pneumagger]

Firebaldes are for mags with bateries. Booo! rabble rabble rabble :cuss:
This is a stock Logic vert frame trigger. Identical to the fireblade, but better.

So I was at the store today and wanted to try out a DM5 for comparison. As soon as i picked it up I noticed that it was heavier than the mag. After holding them both at the same time, I came to the conclusion that the ULE Mech mag was quite a bit lighter than the DM5. I never even had to shoot it to know I had the better gun :rolleyes: Good thing I don't own one of those pieces of ish. :rofl:

[MoeMag]

http://i33.photobucket.com/albums/d53/MoeRoark/DSCN0203.jpg

My Ego does 40 cps :D Thats in semi 1 too. I couldnt belive it when I saw it. :cool:

[Lohman446]

My Ego does 40 cps :D Thats in semi 1 too. I couldnt belive it when I saw it. :cool:

Don't, cause its a vanity counter

[the mag guy]

:headbang: :headbang: :headbang: :headbang: :headbang:
thats all I can say!

Mags rock, were the shiz and thats all there is to it.

[Troen]

Don't, cause its a vanity counter
:hail: i hate those damn counters

[paint magnet]

Lol, my first thought was "he forgot the on/off top." I did that once and scared the hell out of myself :)

[Jack & Coke]

looks like someone left out the on/off pin o-ring...

this trick is not new... but fun nonetheless! ;)

http://www.automags.org/forums/showthread.php?t=81197

(from 2003 - most of the links are broken, but you can see we've gone over this before)

it's not sweetspotting, the bolt just slaps back and forth really fast.

It never touches the sear either.

It's able to do this because the lack of an on/off oring turns the dump chamber into a normal open-style valve. Air is constantly rushing past the valve as long as the trigger is pulled.

The bolt flys foward, then returns as it rebounds off the front bolt stop of the body, then with the aid off the main spring it returns back into the valve where it bounce back forward since there's no sear to catch the bolt. This is why it's harmless to the internals to the gun.

If you were able to actually feed it fast enough (qloader?) i doubt there would be enough pressure availble in the dump chamber to fire a ball consistantly 300 fps.


:shooting:

Video:

http://www.youtube.com/watch?v=LOXIXNOCgnY

[Pneumagger]

yeah. I was so relieved to find out it was only missing the reg pin oring parts and not something worse.

[RRfireblade]

Yes, that 'Mod' goes way back to the 90's for anyone who's worked on Mags regulary at the field or under poor lighting conditions. :D They will typically free cycle in the low 30s if your getting full recharge, if not then they don't quite fully cycle but actually sounds a bit faster. Won't feed paint tho unless you are getting a full recharge.

Turns alot of heads either way at the feild tho. ;)