TheBigRaguPB4L
12-25-2001, 06:55 PM
i have 2 12v revys. i'm pretty sure my black one is a standard vl pre-be 12v. now i have a blue one that i had to switch out a few things. i had gotten the evolution(don't ask me why) a while ago that had broken. i was going to get it fixed but i just bought a 12v case. i took the motor out of the evo and put it in with the board of an OLD 12v and a new sensor. it worked fine but i noticed it had the pause of be 12v. whatever, still works fine.
i had the evo paddle and saw the thread on how to do the mod to them and put it in a 12v. i cut the arms, drilled the holes, and used weed wacker line for the arms. i took one 140 pod of paint and timed how long each revy took to empty it(with the exception of the last 2-3 balls bobbling in the hopper). now i wish i timed it before the mod, but i didn't. with the mod done in the 12v without the pause, it took an average of 11.96 seconds. it took the 12v with the standard paddle and the pause 14.06 seconds. both of those are averages of 6 times and with the same set of batteries. i have another standard 4 arm paddle that i'm going to switch out with the modified one and i'll time it, but that's for another time.
i had the evo paddle and saw the thread on how to do the mod to them and put it in a 12v. i cut the arms, drilled the holes, and used weed wacker line for the arms. i took one 140 pod of paint and timed how long each revy took to empty it(with the exception of the last 2-3 balls bobbling in the hopper). now i wish i timed it before the mod, but i didn't. with the mod done in the 12v without the pause, it took an average of 11.96 seconds. it took the 12v with the standard paddle and the pause 14.06 seconds. both of those are averages of 6 times and with the same set of batteries. i have another standard 4 arm paddle that i'm going to switch out with the modified one and i'll time it, but that's for another time.