UnderCurrent
08-20-2006, 04:49 PM
Ok, this is still the same problem that I was having, but now it has changed slightly and I will have a better description this time around. To start, I have a minimag body, with a Retro Valve and Lvl10, and an intelliframe. Iv got a check-it on/off asa with macroline, incase that matters.
I took my gun out yesterday to see if it was still having problems. I gassed it up, and there was no leaks as far as I could hear. When I sounded kinda like it was short stroking, and the balls were only going maybe 3 to 5 feet. The first 3 shots were just like that, then it shot normally for maybe 7 or 8 shots, and I didnt have a chrono because I was at home, but it seemed like some where shooting faster or slower than others. After those 7 or 8 shots they would do what they did when I had just gassed it up, and the cycle would continue like that.
Im assuming that it would be a valve problem, but I havent had the mag for that long, so Im not sure what it could be beyond that. :tard: Help is appreciated.
I took my gun out yesterday to see if it was still having problems. I gassed it up, and there was no leaks as far as I could hear. When I sounded kinda like it was short stroking, and the balls were only going maybe 3 to 5 feet. The first 3 shots were just like that, then it shot normally for maybe 7 or 8 shots, and I didnt have a chrono because I was at home, but it seemed like some where shooting faster or slower than others. After those 7 or 8 shots they would do what they did when I had just gassed it up, and the cycle would continue like that.
Im assuming that it would be a valve problem, but I havent had the mag for that long, so Im not sure what it could be beyond that. :tard: Help is appreciated.