View Full Version : LPR on am/mm VA
Carbon Blue
08-22-2006, 10:34 PM
just wondering if any of you guys have any pics of an lpr mounted onto an am/mm VA. Ive searched but the only pics i can find have RTP VA's being used. I would like to know how much lower the LPR sits onto the am/mm VA as compared to the RTP VA where the LPR is placed a little bit higher. Of course this is pneumag related :D
Lenny
08-23-2006, 02:26 AM
I don't have any pics, but it probably wouldn't sit any lower than 3/4 inch from the rail, but my guess would be about 1/2 inch fomr the rail.
Pneumagger
08-23-2006, 08:36 AM
The chrome and black pneumag... I shall dub this hereth mag, as "The Brick" :p
Lohman466 should be getting her back today. This is quite a collection of geriatric
outdatad paintball guns [automags to be exact]
http://img113.imageshack.us/img113/8247/picture069oe9.jpg
. I would like to know how much lower the LPR sits onto the am/mm VA as compared to the RTP VA where the LPR is placed a little bit higher. :D
If done right it will sit at the same height as the factory side port.
Here is a picture of an MM VA with 2 extra ports and milled off wings. Not really the picture you ask for but it may help.
http://www.lukescustoms.com/asa.JPG
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.