PDA

View Full Version : Custom mag bodies?


slateman
09-10-2006, 10:35 PM
I know there are a few out there, but I can't keep them straight :tard:

My classic mag is well . . . old. And considering I'm thinking of turning it into a pneumag, I thought I might get a new body as well. But like I said, I can't keep them straight.

Could some of ya'll list them? (and include pics please? :D )
shorty24
09-10-2006, 10:57 PM
Well, I don't have pics of them, but here goes:

ULE mainbody by AGD (and Pariah and Exile bodies by Rogue, which are essentially milled down ULE's). ULE on my former pneumag below:
http://img182.imageshack.us/img182/409/picture001yx5.jpg

Pariah by RPG
http://img170.imageshack.us/img170/9175/rpgpariahulebody1mv7.jpg

Exile by RPG
http://img170.imageshack.us/img170/2323/rpgexileulebody1rm6.jpg

IT body by Xtreme Depot
http://img144.imageshack.us/img144/6268/itbodyyp9.jpg

Micromag body by PTP, several different versions made (this is a body/rail combined).
http://img99.imageshack.us/img99/7382/microemagau3.jpg

Karta by Deadlywind
http://img223.imageshack.us/img223/7217/kdogkarta21xr6.jpg

Dallara by Deadlywind
http://img170.imageshack.us/img170/9825/headcasedallarasm3yx4.jpg

Minimag (basically a 68 Classic body with an extended front "shroud").

Chord V1

Chord V2
http://img170.imageshack.us/img170/76/magnoirla4.jpg

The old SS RT Pro bodys

And then of course, the SFL Emag, the Xmag, and so on.

Xmag
http://img223.imageshack.us/img223/6877/emag1ny5.jpg

SFL (heavily milled)
http://img98.imageshack.us/img98/6231/zmansflwarp2kv9.jpg
A-Tach-One
09-10-2006, 11:01 PM
IT body was Xtreme Depot
Chord V1 Chord V2 Deadlywind
sluggo body and create your own masterpiece.
Chronobreak
09-10-2006, 11:09 PM
Karta by Deadlywind
http://img223.imageshack.us/img223/7217/kdogkarta21xr6.jpg


by far the best of them all

oh, and all are discontinued so unels your getting a ule expect to pay $300~ or more

and who on AO knows me as kdog? :confused: :ninja:
Rudz
09-10-2006, 11:24 PM
i do..kdogg, karta keeper, ..chronobreak..pbn mod...man of many names..
shorty24
09-10-2006, 11:53 PM
can't fit any more pics in my first post, so I'll have to continue later...
slateman
09-16-2006, 11:07 PM
Not to up an old thread, but will all of those bodies work on an Emag rail? Or would I have to get a new one? :)
shorty24
09-17-2006, 01:00 PM
Pretty much all of them should. The micromag, SFL, and Xmag bodies you'd only need your lowers of course, but other than that they should. And depending, some of the old SS bodies from factory mags may not fit if your rail.
cyrus-the-virus
09-17-2006, 01:29 PM
IT body was Xtreme Depot
Chord V1 Chord V2 Deadlywind
sluggo body and create your own masterpiece.

Where can I get that IT body? it looks sexy
shorty24
09-17-2006, 01:41 PM
You're gonna have to find one used somewhere as they're out of production. Every once in a great while one will turn up on b/s/t or ebay.
cyrus-the-virus
09-17-2006, 01:46 PM
You're gonna have to find one used somewhere as they're out of production. Every once in a great while one will turn up on b/s/t or ebay.

DAMNIT

Why did AGD disscontinue the SLUG body? I really wanted a karta...
slateman
09-17-2006, 02:19 PM
DAMNIT

Why did AGD disscontinue the SLUG body? I really wanted a karta...
because everyone said they were too expensive. Ironic, isn't it? :D
cyrus-the-virus
09-17-2006, 02:57 PM
because everyone said they were too expensive. Ironic, isn't it? :D

wow.....just wow

Even I am amazed at the depth of stupidity people have...
Fred
09-17-2006, 03:04 PM
IIRC most Extreme Depot bodies were not made from AGD slugs... and the tolerances showed... beware of them...
slateman
09-17-2006, 03:07 PM
wow.....just wow

Even I am amazed at the depth of stupidity people have...
What? Isn't that what happened? No one bought them because they thought they were too expensive because you had to buy the body then have it milled.
shorty24
09-17-2006, 03:09 PM
IIRC most Extreme Depot bodies were not made from AGD slugs... and the tolerances showed... beware of them...

Although I've never actually owned one, I heard the same thing. There was a post up ages ago about that...

/I'd prefer a Dallara or Karta, anyway...
cyrus-the-virus
09-17-2006, 03:17 PM
What? Isn't that what happened? No one bought them because they thought they were too expensive because you had to buy the body then have it milled.

That wasent directed at you it was directed at the people who said slugs were to expensive then (when they were like 150$)

Now people are shelling out 200-300$ for them...
11 Bravo
09-17-2006, 03:18 PM
What? Isn't that what happened? No one bought them because they thought they were too expensive because you had to buy the body then have it milled.


AGD quit producing the slug bodies. :( They were being bought, I am sure Deadly Wind was buying a good number.
cyrus-the-virus
09-17-2006, 03:18 PM
AGD quit producing the slug bodies. :(

no **** shurlock..... :( :cry:
Triangle
09-17-2006, 03:20 PM
That blue and pewter one is gorgeous.
11 Bravo
09-19-2006, 02:31 PM
no **** shurlock..... :( :cry:

You must be a PBN refugee. :(

If you would read the entire thread you would see that he is inquiring as to why there are no more aftermarket bodies. I stated the fact as it is. No AGD slugs no aftermarket bodies.
StygShore
09-19-2006, 04:31 PM
hmmm Nicad if you are looking... what would it cost to get a sluggo turned into a karta body if I could happen to get my hands on them?


Anyone else try and machine sluggos or bodies from scratch ever?


Styg