My 3 year old gun, looking for new upgrades

[gotboostedvr6]

http://i24.photobucket.com/albums/c24/gotboostedvr6/DSC00865.jpg

thats her pic i havent been playing for a long time im looking for small helpful mods i can do that will increase my "fun" during a game

mods are as follows
Xvalve
agd trigger frame
black ice uni reg by air america
dye stainless 12"
VL 12v or 18 v not sure
everything else is obvious

lmk what you think

[TheAngryDrunkenRussian]

I'd get rid of that extra reg and go with a CP foregrip and look at doing a Pneumatic trigger do on her.

[Tool-of-death]

thats her pic i havent been playing for a long time im looking for small helpful mods i can do that will increase my "fun" during a game

mods are as follows
Xvalve
agd trigger frame
black ice uni reg by air america
dye stainless 12"
VL 12v or 18 v not sure
everything else is obvious

lmk what you think

it's a 12V cus to my knolage they never made an 18v

Don't need the reg, go with a Deadly wind carbon fiber grip. they are nice and light too
http://www.deadlywind.com/store/mag_cf_foregrips/index.html

A ULE body for sure.
(I hope you know where you can get one)

A Deadly wind wisper barrel (great barrel)
http://www.deadlywind.com/store/wisper/index.html

Shrink wraped hose
http://www.themagesmith.com/

and a diffrent trigger and grips for your intelli (dye stickie 3's are awsome)
http://www.themagssmith.com/

Thats what I would do..... but thats me not you.

[gotboostedvr6]

awsome thanks for the good replys

this forum seems to be a friendly one so i think ill stick around


keep the ideas coming!

[gotboostedvr6]

for some reason im only getting 450 psi from my tank i think my tank reg is bad

what would be a good replacement larger tank for me to get ill do screw in or non screw in style

[gotboostedvr6]

whats a ULE ? sorry for the noobness but ill learn quick.

[Tool-of-death]

for some reason im only getting 450 psi from my tank i think my tank reg is bad

what would be a good replacement larger tank for me to get ill do screw in or non screw in style

guerrilla regs are nice regs
http://guerrillaair1.chainreactionweb.com/store/product_info.php?cPath=23&products_id=128&osCsid=7e0cbd202907663988383c147d71749c

Ultra Light Engenering
It's AGD light weight body, it takes angel feednecks and detents, and autococker threaded barrels

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=337&categoryID=10

[gotboostedvr6]

wouldn't a power feed pull balls faster?

[hs2000]

^if you want to feed balls faster, get a faster hopper.

If that was mine, I'd pull off the reg and huge drop forward, and put on a ULE body and a single trigger.

[gotboostedvr6]

bump :cool:

[mclaggan123]

they called them 18v cause they take 2 9v batteries. but yes its a 12v.

[2BAD4U]

Buy an O-ring Kit & replace all of the O-rings in the gun. Lubricate your marker once a week 4-fewest problems. to properly lube your 68AutoMag /MiniMag, drip 4-6 drops of Autolube in 2-the air inlet closest 2-the valve. Then gas up & dry fire your marker several dozen times with the barrel removed(2 prevent oil buil-up in the barrel) ......

[Ir0nExpress]

Warp Feed!

[FlawleZ]

it's a 12V cus to my knolage they never made an 18v



Yes, they did.

[pump]

if you can ULT an Xvalve i would...but i dont know for sure

man thats a nice mag...yeah the reg should go

[sniper1rfa]

they called them 18v cause they take 2 9v batteries. but yes its a 12v.


Nope, they call them 12v because the motor runs on... hah, gotcha, 18 volts.
I think earlier versions did have a voltage reg, but the new ones are just an 18 volt PWM. A common mod to older ones was to replace the voltage reg with a 15V reg.


the 18v (as advertised) revvies were usually called an 18V "shredder" due to the adverse effects it had on paint. :)


I would leave that mag as is, besides putting a gas through so you arent triple regging it. *maybe* a centerfeed body, now that you have LX. You wont have any feeding problems that way (i don't on my vf micromag). years ago, that would be considered the sickest setup on the block, and as far as i am concerned, it still is. Still shoots just as nice as it did 6 years ago. :clap:

[Pneumagger]

... im looking for small helpful mods i can do that will increase my "fun" during a game...


If by "fun" you meant "cases of paint and air shot" during a game...

Buy a force feed hopper (Halo, Egg, Warp), ULE Body, and make a pneumatic frame. A better HP reg might help too.

[gotboostedvr6]

i dont want this gun to be insanly fast just accurate and realible..

[Allfat]

Mind you I dont know much about mags, but I have a pretty good knowledge of paintball in general. Your best bet for accuracy is good paint to bore match. Saying that, you might think of getting a couple other barrels of different bore size than your current barrel. Another thing that factors into accuracy is consistency of your air. I would say that you have a pretty damn good setup with your three regs, but it might be a little bit overkill. And I know that mags are pretty darn reliable without having to do much to them at all.

So I would say to increase your accuracy, get a couple of other barrels and then size up your barrel every time you play to get the best paint to bore match.

[K Wolf]

Nice mag. As has been previously stated, it would be a good idea to remove the extra regulator. It is not needed on a mag, it is extra weight, and is probably slowing the recharge time between shots. A lighter barrel would do wonders for the feel. If your budget allows, a deadlywind CF barrel and a ULE body (you'll have to remove the twistlock assy from your rail) would make an awesome light weight marker.

PS I'm guessing by your screen name that you are a VW nut. What's the VR in?

[spectre184]

for some reason im only getting 450 psi from my tank i think my tank reg is bad



Dunno how long you had tank or if you bought it when you got back to playing. They do make tanks that are considered 'low pressure' with output pressures around what your saying and 'hi pressure' that are 750 psi and up. Us mag owners want the hi pressure output tanks :headbang:

I have one of those barrels though I usually play with 10" one piece stainless DYE.

OBTW nice gun :)

[gotboostedvr6]

thanks for the good comments
i just bought a WGP WORR 90ci 4500 tank with an adjustable output reg and im looking in to finding where i can get a lightweight foward gass through grip that will get rid of the mount i have now

[phizz]

if you want accurate and reliable you basically have it with no upgrades needed. Like everyone else I would say get rid of the reg on the marker and go with a gas through forgrip or any type of foregrip and you are good to go.

[gotboostedvr6]

cool thanks but heres how she looked before i just tradeed her for a dm6
http://i24.photobucket.com/albums/c24/gotboostedvr6/1101060130-1.jpg

[2BAD4U]

Check out E-bay . search under AutoMag & find some cool **** ......

[2BAD4U]

cool thanks but heres how she looked before i just tradeed her for a dm6
http://i24.photobucket.com/albums/c24/gotboostedvr6/1101060130-1.jpg
how do you keep the loader tight in the feedneck ??????

[gotboostedvr6]

it just fits like a glove but this marker is no more as i have traded it for a dm6 :headbang: