RT Pro on/off in a classic valve? {Attn:: TheBigRaguPB4L}

[z-zero]

I just read that it makes you trigger pull lighter, does it give any reactiveness? how much lighter? Which on/off pin are you using? I'm not familiar with the RT pro valve, but I thought the on/off pin was a different length.

z-zero

[Manuel_FZR]

I asked this in the "poll: On/Off Valves" thread. ;) Didn´t see your Post ...

[z-zero]

Must have missed it while posting the question myself :p

z-zero

[z-zero]

OK here we go, I think I read somewhere that the RT pro and the classic valves require different trigger rod lengths. So is the trigger pull lighter because the rod is set for the classic but has the on/off of the RT? Does this cause excessive bolt/sear wear? Are we talking about the RT Pro on/off or the old RT on/off. Can you use co2 with the RT on/off, someone please answere I'm driving myself nuts trying to figure it out. Maybe I'll just buy one and see...... :p

Thanks

z-zero

P.S. You don't need to reply to my other thread in the whick on/off poll, lets keep everything here.

[z-zero]

bump

[Cha0tic]

rts and regular mags have the same length trigger rod. if you put an rt on/off in a regular mag, it will not make it reactive at all.