Warp feeds on other guns

[wws2010]

I have an ion and was wondering where is the cheepest place to get a kit for one is.

[warbeak2099]

You'd need a PTP warpfeed. www.proteamdirect.com

[wws2010]

couldent i buy a an agd warp feed then buy this bracket

the link (http://www.proteamdirect.com/warfeedgen4b.html)


Would this work to
The other link (http://www.paintballemporium.com/airgundewafe1.html)

[warbeak2099]

It's not about the bracket. It's about the elbow that goes into the feedneck. The AGD one is designed to fit over a smaller diameter neck than an Ion has. You need the elbow that comes with the PTP kit. It is designed to fit into a feedneck, not on the outside of it.

[wws2010]

It's not about the bracket. It's about the elbow that goes into the feedneck. The AGD one is designed to fit over a smaller diameter neck than an Ion has. You need the elbow that comes with the PTP kit. It is designed to fit into a feedneck, not on the outside of it.
so couldent i buy the agd only and buy the adapter seperately

[Toll]

All you have to do is dremel off the wee plastic bit that holds the screw and the nut and it will fit inside your current feedneck with a bit of help.

[MANN]

you will have to do something similar to this to fit inside your feedneck

http://i70.photobucket.com/albums/i83/mannsports/f36b324a.jpg

[wws2010]

So all i need are these two things.

LINK #1 (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=WC53iaV5EHt3nOAIuQ23Ia_f0DrfQXwzEGY=?Pro ductID=2PLAqArbjSIAAAEDA4%2eJaT0Q)

and

LINK #2 (http://www.proteamdirect.com/warfeedad.html)

AND THEN IT WILL WORK. CORRECT?

[MANN]

you dont need link 2. (I dont think they have any more anyways) Link 1 has the clear elbo. You will need to cutt off the screw fitting with a dremel (or pm me and Ill trade you for one that is ready to go) and it is good to go

[Lenny]

Check THIS (http://www.automags.org/forums/showthread.php?t=204820) thread out. It explains how to rig a warpfeed to feed per trigger pull (like intellifeed on an Ion)

[wws2010]

Can you show me how to dremmel off the extra nut. Like the a before and after.

[VFX_Fenix]

You need -

This... (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=WC53iaV5EHt3nOAIuQ23Ia_f0DrfQXwzEGY=?Pro ductID=2PLAqArbjSIAAAEDA4%2eJaT0Q)
http://images.actionvillage.com/inc/images/large/014-260-0001.jpg?cell=500,450&cvt=jpg

And This...
http://www.humboldt.edu/~mwo5/a5og/AO/univ.jpg
^^^
From PTP

[Toll]

http://images.actionvillage.com/inc/images/large/014-260-0001.jpg?cell=500,450&cvt=jpg



That nut right there iswhat needs to be cut down. Basically just making it a circle.

[wws2010]

http://images.actionvillage.com/inc/images/large/014-260-0001.jpg?cell=500,450&cvt=jpg



That nut right there iswhat needs to be cut down. Basically just making it a circle.

thanks this is great im getting my setup in the nextcouple weeks

[Tao]

Holy a PTP warp is $179!!!!

[don miguel]

Holy a PTP warp is $179!!!!
i believe it does 20bps, not 16 like an AGD warp. i wan't to know, does AGD have a patent on the warp feed? or is threr a deal between companies? there is the micomag also.

[VFX_Fenix]

i believe it does 20bps, not 16 like an AGD warp. i wan't to know, does AGD have a patent on the warp feed? or is threr a deal between companies? there is the micomag also.

The AGD Warp will do 20bps, the two Warps (PTP and AGD) are virtually identical, however PTP's warps don't have a vibe sensor mounted within the warp itself (and so use slightly different shells than the AGD counterpart). Both Warps are equally capable with a 12V Warp Mod.

[wws2010]

The AGD Warp will do 20bps, the two Warps (PTP and AGD) are virtually identical, however PTP's warps don't have a vibe sensor mounted within the warp itself (and so use slightly different shells than the AGD counterpart). Both Warps are equally capable with a 12V Warp Mod.

couldent you do a homemade verson of the 12volt mod youself

[VFX_Fenix]

Yep, all you need is a little soldering experience, about $3 in parts and know how to wire-up a set of batteries in series.