View Full Version : Does the body rail wear out?
I got a used eclipse splash kit a little while ago and i played one game with it. a few days later i screwed in my tank and it was leaking. i looked over the owners manual and video and nothing was simlar to my problem. so i took it to my local feild and had it fixed. i went to pick it up and he said my body rail was worn out and i needed a new one. he put a body rail from one of the other mags on it and it worked. is it true that the body rail wears out?
Cha0tic
12-30-2001, 09:36 PM
the body rail should not wear out. the only thing that may wear is the groove where the sear sits in. but i have never heard of it happening.
if your eclipse body rail "wore out" call them and see if you had a defective rail.
The only thing that could possibly wear, is the Zgroove where the A.I.R. valve locks in. Nothing else has a friction point or wear area. He lied to you to sell you another rail.
he didnt have one there what do i do now i would like a matching rail. help me
i've been to there site and i couldnt find anything
Butterfingers
12-30-2001, 10:53 PM
There should be a bushing in the hole where the feildstrip screw goes through in the rail. If you lost this bushing that would be your problem.
nope didn't lose that. it shows were around the sear though
res0qjp2
04-17-2002, 11:37 PM
The problem with rail wear is the grove where the sear pin sits, if it wears just a little it will mess up the travel for you on off pin, another thang that good be wrong is your rail might be a little bent.
Tunaman
04-18-2002, 04:08 AM
I have new eclipse rails if you need one...Silver only
my gun needed oil and a new rail the place were the sear sat was what screwed t up. somehow i managed to fid a brand new rail the exact same color as mine...Luck
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.