View Full Version : Matrix and warpfeed.
Dubstar112
12-24-2006, 01:08 AM
I am about to pick up a Matrix(NYX ), and I am considering puttin a warpfeed on it. Ive seen the breeches rotated 90* before, but I havent had the physical time to take it apart or even look at how it works. Can somone describe briefly how the breech works on a matrix?
behemoth
12-24-2006, 01:29 AM
I just picked up a matrix, and I am considering puttin a warpfeed on it. Ive seen the breeches rotated 90* before, but I havent had the physical time to take it apart or even look at how it works. Can somone describe briefly how the breech works on a matrix?
The knob at the back of a matrix is connected to a long threaded rod, goes thru the center of the marker, and holds the breech on.
http://www.warpig.com/paintball/technical/loaders/matrix_warp/index.shtml
Would be a bit more intricate if the matrix has eyes.
Triangle
12-24-2006, 01:31 AM
I just picked up a matrix, and I am considering puttin a warpfeed on it. Ive seen the breeches rotated 90* before, but I havent had the physical time to take it apart or even look at how it works. Can somone describe briefly how the breech works on a matrix?
You are in luck!
Anonymous delivers
http://www.warpig.com/paintball/technical/loaders/matrix_warp/index.shtml
Triangle
12-24-2006, 01:31 AM
God DAMNIT Josh.
behemoth
12-24-2006, 01:33 AM
God DAMNIT Josh.
I'm sorry, my precious derek.
Triangle
12-24-2006, 01:36 AM
I'm sorry, my precious derek.
It's ok.
Wanna buy a baby?
Dubstar112
12-24-2006, 01:41 AM
Oh man, I forgot all about warpig. That does look a little more involved than I am capable of.
behemoth
12-24-2006, 01:41 AM
It's ok.
Wanna buy a baby?
Specs and pics?
Dubstar112
12-24-2006, 01:46 AM
Umm I call dibbs on the baby. My thread!
I have a few animal mounts on the wall, a stuffed baby petting my full bear mount would be gorgeous!
behemoth
12-24-2006, 01:49 AM
Umm I call dibbs on the baby. My thread!
I have a few animal mounts on the wall, a stuffed baby petting my full bear mount would be gorgeous!
thats more humane then wht i was gonna do with it.
Dubstar112
12-24-2006, 01:51 AM
Details?
behemoth
12-24-2006, 01:53 AM
Details?
Cant do it.
scion
12-24-2006, 08:11 AM
If you don't want to do it you can pm this guy called entropy on pbnation. He has done a couple cusomt matrixs that were sweet and he would probably be willing to do that for you for some monies.
CrimsonGhost
12-24-2006, 09:09 AM
There was a breach out on the market for the Matrix called the "exorcist" I think it was 3 years ago though.
Hunt around a bit ...there may be a few people who have them.
I did , now Im kinda sorry I gave it up.
Im not sure of the company that made them or anything BUT I KNOW it was called the exorcist breach. it could be made very, left or right.
SR_matt
12-24-2006, 09:47 AM
Oh man, I forgot all about warpig. That does look a little more involved than I am capable of.
meh its not to much work all you need are i think a total of about 5 tools.
-hack saw
-drill bit
-tap
-file
allen wrench to screw in the set screws.
you can realisticly do that in about an hour (remember AL is a soft metal so it takes little time to work it
-matt
scion
12-24-2006, 09:50 AM
Here's entropy's thread:
http://www.pbnation.com/showthread.php?t=1475554
mobsterboy
12-24-2006, 10:35 AM
Cant do it.
how long does it take josh to paint his house?
...
Depends on how hard he throws the dead babies at it
behemoth
12-24-2006, 12:04 PM
how long does it take josh to paint his house?
...
Depends on how hard he throws the dead babies at it
I built a pneumatic cannon, with a sort of hopper feed. House is painted in no time.
behemoth
12-24-2006, 12:06 PM
Here's entropy's thread:
http://www.pbnation.com/showthread.php?t=1475554
Damn, what a hack job.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.