Problem: Bolt Sticking

[hopped]

I dont know which thread to look under. I have a classic valve with lvl 10 installed correctly, or so I think. I can shoot at a regular rate pretty well and then when I try to really shoot fast my bolt is sticking and then slowly clicking back. when it sticks I hear a slow air whoosh noise and then eventually clicks back.

Do I need to reinstall the lvl 10, or totally break it down and just lube it all up? I oil it in the little oil holes every time I take it out, just a drop in each hole.... should I be doing something different?

thanks for all your help in advance,
Jonathan

[MANN]

use a looser carrier tube, and if your using a ule body back out the detent. Oil everything up real good.

[flyingpootang]

If your using more than 3 shims remove one. If not than use the next loosest carrier.

[Tunaman]

Add another shim or 2.

[Greg2230]

Are you using Co2??? If so, thats your problem. Its freezing up once you get into rapid fire because liquid is getting in.

[hopped]

I am an idiot, after servicing my whole gun (changing out all the o-rings and such) I used the wrong carrier for some reason.... was just a bad lvl 10 install... thanks for the responses.

[athomas]

Also, don't use the oil holes. Drop a couple of drops in your ASA.