I think I'm finally done...maybe

[DSR75]

Well,

After deciding and undeciding and redeciding I think I'm finally done modding my mag. Maybe :rolleyes: I might change the frame if I can find a UMF or decide to buy one of Jay's. I also have looked at getting some wood grips to match the foregrip but I can't find any that fit the grip styx frame and since I haven't decided completely on that frame I'm holding off. I've borrowed some ideas from others, well stole is probably a better word. I would like to have an honest opinion on it.

Warp Left tac one body
Rt Rail
Grip Styx frame (I prefer a single trigger, I'm more used to them)
Custom made foregrip (thanks Don aka urbanSix)
14in Stiffi
Custom made machine gun shroud
Micro CA-II (I used to run HPA, PB store closed so I can't get HPA anymore)
Red/Green dot w/ 5 brightness settings for each
PPS Sideline Stab

I use both a custom 15 round feed and a warp feed. It depends on what the day calls for. I play in the woods only so keep that in mind.

http://i32.photobucket.com/albums/d41/BIGCountry75/IMG_0389.jpg
http://i32.photobucket.com/albums/d41/BIGCountry75/IMG_0390.jpg

[mr.mag218]

i like it alot. scenario wise....very very great gun. i can barely tell its a paintball gun. well done :cheers:

[jenarelJAM]

wait, so are you running that off of 12g's? Looks nice.

[warbeak2099]

He can't be. Judging from the stainless backend of the valve, it's an X-valve. He must just be using the stock as a stock.

Nice gun btw. Scary lookin. What loader are you using, Qloader or Warp?

[Head knight of Ni]

He can't be. Judging from the stainless backend of the valve, it's an X-valve. He must just be using the stock as a stock.

Nice gun btw. Scary lookin. What loader are you using, Qloader or Warp?

He's got a Palmer's Stab. on it, which is common for CO2 use.

[warbeak2099]

He's got a Palmer's Stab. on it, which is common for CO2 use.

That's true. But the back end of the valve sticking out looks like an x-valve. Makes me wonder if he's not just double regging an X.

[txaggie08]

DOnt know, might be using 12g's with the X and using the stab to solve any issues?

[zipity_Bop]

Automags are a sickness.... you are NEVER done.......
good for us though :D

[d4m4don3]

You are the first to mount your stock to the back accessory slot. Good job!

Ive been wondering when someone would do that. :headbang:

1st in a while?

Wasn't that common back in the day? The classic rails had that accessory slot.


http://www.automags.org/forums/showpost.php?p=2282916&postcount=11

[warbeak2099]

DOnt know, might be using 12g's with the X and using the stab to solve any issues?

I'm not sure the stab would really solve the problem.

[kruger]

Very nice. And, I might be able to help you out with the wood grip thing

[warbeak2099]

1st in a while?

Wasn't that common back in the day? The classic rails had that accessory slot.


http://www.automags.org/forums/showpost.php?p=2282916&postcount=11

He means on his rails.

[d4m4don3]

He means on his rails.

OIC I stand corrected :hail:

[DSR75]

I'm using a classic valve. I no longer have access to HPA. I've always used a classic valve so it wasn't that big a deal.

Kruger, I'll have to get with you on the grips. I'm waiting to decide if I want to buy a new frame first.

I use both a warp and a custom made 15 round loader.

Thanks for the complements.

[gus13]

you should post up a pic with the 15 round feed and another w/ the warp, It looks sweet as is, but I'd like to see the custom loader! good job all in all, nice work.

[DSR75]

I'll try to get those pics up in a day or so. I have to go borrow a digital camera since I spent all my money of this and can't afford one.

[hmudd13]

A six-pack would be awsome on that!
Job well done
I'm going to look into something like that myself, maybe on a pump.

[DSR75]

I was looking at either a 6pak or an ACI turret but the cost difference was so much that I went with the micro ca-II instead. $80 vs $250

[gus13]

I was looking at either a 6pak or an ACI turret but the cost difference was so much that I went with the micro ca-II instead. $80 vs $250
for which the 6 pack or the ACI?

[DSR75]

$250 was for the 6pak, $190 for the aci, $80 for the micro ca-!!

[thegrayghost]

i think i know this marker, lolololo.....great job on it....and if i remember, someone asked you how you made the barrel shroud, and you gave a "how to" :clap: .....

[buzzboy]

May just be me but I would stick with the Grip Styx frame. It seems to fit the whole idea very well.

[DSR75]

I would really like to stick with it but I've been having some problems with it. The frame was originally an am/mm designed frame which meant it was the wings and groove to fit the old rails. I had to machine them off so it would fit flush with the RT rail. Unfortunately it must not be 100% flush or there is a design flaw and the sear is forced at an upward angle instead of straight back. This leads to some problems sometimes.

[Demonio]

It's a nice one. I was thinking of doing a stick feed on one of my warp bodies. I'd like to see the pics when you get them done.
Very cool little set up.