View Full Version : Trigo Time!
Gunslinger7 and I are making this beautiful Viewloader Triad into an Ego-ish Marker. Here's the back milled by us so far. Feedneck is comming off next, then paint. I will update during the process.
http://i30.photobucket.com/albums/c311/faction37/100_0922.jpg
http://i30.photobucket.com/albums/c311/faction37/100_0921.jpg
http://i30.photobucket.com/albums/c311/faction37/100_0920.jpg
Don't mind the feedneck. :rolleyes:
New Update!
Feedneck Removed!
http://i41.photobucket.com/albums/e258/ActionFig/100_0935.jpg
http://i41.photobucket.com/albums/e258/ActionFig/100_0937.jpg
http://i41.photobucket.com/albums/e258/ActionFig/100_0936.jpg
warbeak2099
02-03-2007, 06:55 PM
Make it into an E-pneu and you will not only have an Ego-sih looking marker, you'll have an Ego!
Pretty easy with the stuff that Scenario dreams is putting out:
http://www.scenariodreams.com/oscommerce/index.php?cPath=18&osCsid=240d30bbc9122582b300259491d484c2
You'd need:
Primal or Dragun The One Board
EP Solenoid
EP Ram
EP Frontblock/lpr
probly the EP Gripframe
Cheap-ish spimmy conversion.
Nice milling job btw, very smooth.
gunslinger7
02-04-2007, 11:51 AM
Feedneck comes off this week, then off to gruntbull for annodizing.
iambored
02-04-2007, 02:53 PM
someone did that to a spyder once. It's somewhere on pbreview. It looked alot like an ego, very nice.
jenarelJAM
02-05-2007, 12:33 AM
Wow... Serious props to you... I want to see it when it's done. Yes?
Pneumagger
02-05-2007, 06:50 AM
Have an MPA-3 actuate the sear using a small solenoid valve and board to control dwell.
That would mow for sure.
warbeak2099
02-05-2007, 08:07 AM
Have an MPA-3 actuate the sear using a small solenoid valve and board to control dwell.
That would mow for sure.
Just slapping on the Scenario Dreams ram and lpr frontblock would be way easier. It's like $30 for both. Then about $65 for a E-Pneu T-board. Then $15 for the E-pneu solenoid. $110 total . Should come out to be the same with a MPA-3, they're like $30 right?
Pneumagger
02-05-2007, 11:37 AM
Just slapping on the Scenario Dreams ram and lpr frontblock would be way easier. It's like $30 for both. Then about $65 for a E-Pneu T-board. Then $15 for the E-pneu solenoid. $110 total . Should come out to be the same with a MPA-3, they're like $30 right?
I have a triad, and I'm not sure you can use that part on it. I know the triad even has a funny thing to the frame as to where you cannot swap it with a spyder frame.
warbeak2099
02-05-2007, 01:43 PM
I have a triad, and I'm not sure you can use that part on it. I know the triad even has a funny thing to the frame as to where you cannot swap it with a spyder frame.
o that sucks
gunslinger7
02-05-2007, 03:08 PM
I have a triad, and I'm not sure you can use that part on it. I know the triad even has a funny thing to the frame as to where you cannot swap it with a spyder frame.
I've hitched a Spyder frame to it before. It's a simple sear tripping mechanizm frame. I'm sure I could use an Eblade if I personally wanted to.
New Update! We need a double clamping style feedneck like those of the Ego Feeds. Any will be looked at, thanks!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.