Swapping trigger frame...

[georgeyew]

I want to swap an Intelliframe from one Minimag to another, and I've never done one. So before I start, I want to ask if there is anything that I need to look out for. And if there is a online diagram out there, that would be even better. Thanks in advance for your help.

[Jaan]

It's wicked easy. There's nothing special about it. Just stick the rod into the right spot and screw it into place with 2 screws.

The easiest way for me to explain it to you is that when you take the Intelliframe off the original MiniMag, do it slowly and pay attention to where the trigger rod is located, and just reverse the process.

See, I'm making it seem way more complicated than it is. If you can figure out how to put a chain on a bicycle you can figure this out :)

[georgeyew]

Thanks. Now I feel better about not being able to screw it up.

[georgeyew]

I was able to change the frame last night. And it was pretty easy just as Jaan said. But I went slowly to make sure that I knew how all the pieces would go back together. I also lubbed all the moving parts :) Thanks for the help.