Can the Revy feed the WARP?

[Manuel_FZR]

I have a question:
At a gun-setup with WARP and 12V Revy; have you guys any problem with the Revy not feeding the WARP fast enough at constant high rof (>13bps for more than 50rounds)?
I´m wondering, because the Revy only can feed 11 or 12 bps ... how does it work with the WARP at higher rof?
And do you chop at this point (when the Revy is to slow)?
Would a WARP and HALO be the optimum in your eyes?
Thanks for all your answers!

[FooTemps]

The revy doesn't have as much stop and go when it's attached to the warp so a 13 bps string is easier.

[Manuel_FZR]

But what´s about with a string of 150 rounds at 15bps? Is this possible - and more important - why?

[Bad Dave]

Warp can do 20bps in bursts.

In a string with a revvy feeding it you are probably looking at 11-12 bps over time.

Why? Cause that is what the revvy will feed when maxed out, try the revvy off the gun, how long does it take to empty 150 rounds? Thats how long it would take to feed the gun 150 rounds.

[Sledgehammer]

And BTW can you really shoot 15 BPS in semi mode?

[TheTramp]

No it can't feed that fast for 50 balls. The answer is to pause (very briefly) every 10 balls or so to let it catch up. If you are shooting a line the 1/2 to 1/4 second pause will not cause a big space in your string. The other answer is to limit your long strings to 10bps or so and only shoot faster than that in bursts (shap shooting).

[Manuel_FZR]

Originally posted by Sledgehammer
And BTW can you really shoot 15 BPS in semi mode?

No ;) ... I only wanted to know, if it´s possible. With my Mini I can shoot 7 or 8 bps ... with a friend´s angel i made 10bps ...