Standard, Rapid, Pneu, or Pump?

[G Squat]

Sorry. Dont mean to get too crazy with the polls but I'm curious. What type of "firing system" do you use for your mech? Rapid fire (rt or ult), standard (rt or ult), pneu, or pump.

[PBChappy]

standard rt on/off, flatline reg and 1200 psi to the valve hehe, i have heard on the speed ball field that i am ramping faster then 15 :P I dont ramp hehe

[buzzboy]

Back then I shot a classic valve, classic on/off. Trust me, no bounce.

[personman]

none of the above :)
it's electropneumatic

[zackzel]

it will be electro pneumatic when I get her back. In the past electro and strait mechanical though.

[warbeak2099]

Electromechanical sear tripper... hooray for Spydermags!

[wjr]

What would a classic valve with an RT on-off be considered? That's what my automag is most of the time. Other times it's a pneumag, and it's next incarnation will be an ep mag. :shooting:

[G Squat]

I didnt know an rt on/off would work with a classic valve. Does it still work like an rt on/off? Reactive?

[wjr]

It's fairly reactive, and super light. A vast improvement over the stock on-off. But I haven't shot an rt valve in such a long time it's hard to compare the two.

[Soopa Villain17]

so the rt on/off drops right into the a.i.r valve ? i might have to try this.

[mag_lover05]

What would a classic valve with an RT on-off be considered?

whaaaa??


you can do that?

[don miguel]

whaaaa??


you can do that?
yup, it's just not reccomended due to the classic valve's slow recycle rate. ANd yeah, my mag has problems, when I pull the trigger 4 balls come out. he he.

[Pneumagger]

whaaaa??


you can do that?

it lightens the pull to that of a an RT mag without the added reactivity... so it cuts the pull weight in about half. Without the reactivity it can be short stroked a bit easier than a normall on/off though. It's a very nice comprimise if you want a lighter trigger in a classic valve, but don't want to chuff like crazy with the ULT in the classic.

[buzzboy]

Strangely it worked great on my minimag valve but in a micromag valve the RT on/off didn't even let the gun fire. On the minimag valve though it worked like a dream. A lot lighter and faster. I could (according to a big red chrono) shoot 2 balls faster straight mech with the rt on/off.

[turbo chicken]

pump cause in a month or so that's what ill be ... and cause i have a classic w a standard on off ... that chioce wasn't there

[PumpMag]

I've been shooting my PumpMag for over 2 years now. It's my primary.