Cerberus Innovations NEWEST Mag Part

[jay8541]

The Airwalks big Brother The STORMWalk trigger frame

It is a mechanical wonderland for all you hobbiest out there the possiblities are endless with this Frame Gives you the emag feel with a stylish look All the edges need to be rounded still

takes Airwalk panels in the rear
will take custom panels for the fronts
As for the panels they will be offered in ackrillic blue red and clear and aluminum smooth or tribal
Has a spacious, roomy interior front compartment ( like a car)
Has multiple air ports
has room to go from the front pack to the rear of the trigger frame
Takes AGD speced triggers
It also has a dove tail mount on the bottom for asa's

For those who dont know, the very front of the pack where you see the airports on the top and bottom. they both connect inside of the pack. So if you put an airfitting on the bottom hole either side the air will go through the frame up to the upper airport hole

http://i68.photobucket.com/albums/i15/jay8541/Picture748.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture750.jpg
http://i68.photobucket.com/albums/i15/jay8541/Picture749.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture751.jpg
http://i68.photobucket.com/albums/i15/jay8541/Picture753.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture752.jpg
http://i68.photobucket.com/albums/i15/jay8541/Picture755.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture754.jpg


Here is a look at the a couple of options of panels these ones are made for tuna ball ackrillic blue and Clear Red will also be available as well as all aluminum. Also these are test grips the front panels have a CI in them and the backs are tribal. options on styles will be either tribal or smooth rear panels and for the fronts CI or smooth
http://i68.photobucket.com/albums/i15/jay8541/DSC01157.jpghttp://i68.photobucket.com/albums/i15/jay8541/DSC01156.jpg

[d4m4don3]

The STORM is coming keep posted its coming soon, no Solid works drawings for this one guys.

Wow it's like the transformers commercials....they make you wonder what it is. :eek:

[koleah]

The STORM is coming keep posted its coming soon, no Solid works drawings for this one guys.

So are we going straight to pictures of the prototype?

[Ninjeff]

will i need an umbrella?

[G Squat]

GET OUT YER UMBRELLAS... A STORMS-A-COMIN'! :dance: With the anticipation you're biulding it'd better be more than some fancy new feedneck or a snazzy sear pin. I aint expectin' no drizzle. I'm expecting hurricane frickin' Katrina!

[behemoth]

Worst post ever.

[ß?µ£ §mµ®ƒ]

:cry: what is it

[zazzoo]

Is this what you were telling me about?

[Dark Side]

The Gatlin feed, the Airwalk, pump mods. Why do you want our money?

[nevtangle]

it is for all you hobbiest's out there pictures to come, If you want a close up look there will be a few at TUNABALL so if you can make it I would.
For those of us that can't make it, I hope there will be some very nice video or pics of whatever this may be.

[jay8541]

Umbrellas won't really help if you get hit with these you will need an Ambulance

http://i68.photobucket.com/albums/i15/jay8541/Picture778.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture779.jpg

http://i68.photobucket.com/albums/i15/jay8541/Picture774.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture776.jpg

[ß?µ£ §mµ®ƒ]

Wheres the pump kit!

[jay8541]

For those of us that can't make it, I hope there will be some very nice video or pics of whatever this may be.

pics will be up in a few days of the actually Prototype

[cyrus-the-virus]

.... not again jay....

Now I need more money... This time don't put the preorder up the same day as a tourny...

[neppo1345]

The STORM is coming keep posted its coming soon, no Solid works drawings for this one guys.

A STORM you say?

http://i30.photobucket.com/albums/c348/neppo1345/likethisthread1ba.jpg

[GroovYChickeN 2.o]

A STORM you say?

lol! :rofl:

No really, jay, what is it? :confused:

[mostpeople]

prolly like a mag double trouble with a name like that...

[trevorjk]

im thinking a water gun that looks like a mag :ninja:

will it have super soaker capabilities and beyond? :cool:

[Ninjeff]

im thinking a water gun that looks like a mag :ninja:

will it have super soaker capabilities and beyond? :cool:


so...would that be a "pump" mag? :ninja:

[trevorjk]

so...would that be a "pump" mag? :ninja:



They are being done Smurf but everytime I go back to them(pump kits) something unfortunatly pops up

hmmmmmm :ninja:

[jay8541]

Hey guys I should have pics for you guys Saturday Or latest monday,


THE PUMP KITS ARE ON AND IN THE MACHINES but that is not what this Weather Forecast (Thread) is all about.

[Mongoose]

The STORM is coming keep posted its coming soon, no Solid works drawings for this one guys.
I think i can smell it!

[Madmarx]

Weather reports are always mostly hype.
They told us we were supposed to get 6 to 12 and we only got 2-3!!
This will probably be the same thing.
Looks scary on the weather channel and then... nothin!!!

[Pneumagger]

Dude, Lemme see what your making, and I'll show you what I'm making... :rolleyes:

/seriously though... IM me, I got prototypes for you to make. :cool:

[turbo chicken]

Wheres the pump kit!
Yeah ... the "for the hobbiest" comment doesn't lead me to believe it is the pump kit ...

where's my flippin pump kit ... BTW i'm still on strike till i get it.

*sigh*

and yes the worst post ever ... :(

Jay - been on GOW the past week kicking but ... i want my rematch :D ..

[tech-chan]

Kick him out, I just had my heart stopped and had to be defibrillated.

[KKPASA]

The anticipation is killing me. Oops, I think I wet myself. :(

[robnix]

The STORM is coming keep posted its coming soon, no Solid works drawings for this one guys.

You tease. I don't like you anymore.

[BigEvil]

HEHEHE. :ninja:

[jay8541]

Yeah ... the "for the hobbiest" comment doesn't lead me to believe it is the pump kit ...

where's my flippin pump kit ... BTW i'm still on strike till i get it.

*sigh*

and yes the worst post ever ... :(

Jay - been on GOW the past week kicking but ... i want my rematch :D ..



you can not handle a rematch with me

[Head knight of Ni]

The anticipation is killing me. Oops, I think I wet myself. :(


You think you're excited?!, Feel these nipples!

Is the name Storm a good idea? I mean the hAir got cut and the MQ DQ'ed, what might happen to something name the Storm?

[turbo chicken]

you can not handle a rematch with me

Probably not ... and should i fail to redeem my gaming skills ... ill just have to simply say your better than me. But that doesn't mean I won't ask for the occasional match to test my "skills". Plus I'll only get better playing aginst people better than me.


/end hijack
// going to your other thread in the dealder section to ask about the pump handle prototype...

[master_alexander]

theres gotta be something really good to compensate for such a cheezy title like that...

[Chronobreak]

better be something goood..... :sleeping:

[Rudz]

oh well now looky looky, new pik....nice......

[robnix]

I like you again. A lot. A WHOLE LOT.

[jay8541]

I like you again. A lot. A WHOLE LOT.


it is better in person and they will be at Tunaball

[robnix]

it is better in person and they will be at Tunaball

It's a shame I wont be there, but you've got me very interested in buying one for my <booming voice>ULTIMATE PROJECT MAG</booming voice>

[Rudz]

suck, for u!!!! ill be there!!!

[SummaryJudgement]

I don't know if anyone else thought about this, but that front-grip inerior looks like a GREAT location for an LPR!

:ninja: :cool:

[robnix]

I don't know if anyone else thought about this, but that front-grip inerior looks like a GREAT location for an LPR!

:ninja: :cool:

Or a board...I'm thinking that one panel should be able to be countersunk for set screws and the like.

[p8ntbal4me]

it is better in person and they will be at Tunaball


Im restraining myself Devil!!! Im trying sooooo hard ;)

Tunaball is gonna be a VERY interesting event.

Anyone that can just BE THERE,.... u need to show up.

I got some goodies for the maggers,.... all I need is someone with a video camera and a PACT to clock something ;)


,... oh, and a hot chick to look at all day would be nice too! :headbang:

[BigEvil]

Im restraining myself Devil!!! Im trying sooooo hard ;)

Tunaball is gonna be a VERY interesting event.

Anyone that can just BE THERE,.... u need to show up.

I got some goodies for the maggers,.... all I need is someone with a video camera and a PACT to clock something ;)


,... oh, and a hot chick to look at all day would be nice too! :headbang:


Tunaball is going to be very interseting.. I heard Rudz is going to be signing autographs. Make sure you get on line early.

[Rudz]

should be an awesome time

[Lucifer Bob]

I want one... Now to convince the wife...

[PumpMag]

Wow............... :wow:

Wish I was going to Tunaball........... :(

[snoopay700]

I don't know if anyone else thought about this, but that front-grip inerior looks like a GREAT location for an LPR!

:ninja: :cool:
I had the same idea. I'm not disappointed with this, but i do have to say, i was hoping for something a bit more.

[Rudz]

I had the same idea. I'm not disappointed with this, but i do have to say, i was hoping for something a bit more.


more? with this the possibilities are endless

[Dark Side]

more? with this the possibilities are endless

Yep. Surprised Pnuemagger doesn't already have his name on the preorder list.
Good job Jay. Keep them coming!

[cyrus-the-virus]

Hey jaya how about fitting it with an e-mag trigger rather than a normal one?

It would make those of us who are making an EP conversion a lot easier (IMO anyhow)

[master_alexander]

i think that the battery pack should compliment the frame a little more...

[Mongoose]

:headbang: Very nice. so when does the preorder start! and is there a price in mind.

[snoopay700]

more? with this the possibilities are endless
Well with how he made it sound it sounded like it was going to be a huge innovation, this just gives you more room to work with, i mean it's awesome and everything, but i just expected too much i guess.

[Rudz]

Idk if it was me I'd put a pnue kit or e pnue kit in there, lots of room, just saying...

[p8ntbal4me]

Idk if it was me I'd put a pnue kit or e pnue kit in there, lots of room, just saying...


Hmmmmmmm,... an pneumag in it. Good idea!

An e pnue kit you say,.... even better idea! :)

[jay8541]

Hey guys thanks for the responses, I will be posting pictures of the actual ones this week. as for a pre order list I am going to hold off for a few weeks. There will be many trigger and panel options on this trigger frame set up. Again there are many things that you can use this frame for that was the reason for the HYPE. Hope everyone is keeping an open mind when looking at it. SPACIOUS interior room.

[cyrus-the-virus]

Hey guys thanks for the responses, I will be posting pictures of the actual ones this week. as for a pre order list I am going to hold off for a few weeks. There will be many trigger and panel options on this trigger frame set up. Again there are many things that you can use this frame for that was the reason for the HYPE. Hope everyone is keeping an open mind when looking at it. SPACIOUS interior room.

Hey jay Is there going to be a hole on the frame for the pneumag conversion?

What's the balpark price on this badboy?

[jay8541]

Hey jay Is there going to be a hole on the frame for the pneumag conversion?

What's the balpark price on this badboy?



i will post better actual pics this week pricing will be available then. Thank you for your interest

[cyrus-the-virus]

i will post better actual pics this week pricing will be available then. Thank you for your interest

That's what you always say jay :P

[jay8541]

That's what you always say jay :P


Yes Yes but it is also what I always do. :cheers:

[p8ntbal4me]

Yes Yes but it is also what I always do. :cheers:


'Cause your l33t Devil Pup,....

[Rudz]

Hmmmmmmm,... an pneumag in it. Good idea!

An e pnue kit you say,.... even better idea! :)


yeah u kno, just saying....

[p8ntbal4me]

yeah u kno, just saying....


Word has it,.. A-Tac is banned from BEO.

Gald to see you got your priotities in order Rudz! Cant say the same for A-Tac :confused:

I think the NJ-trans scare got him rather worried. LOL!

[A-Tach-One]

Word has it,.. A-Tac is banned from BEO.

Gald to see you got your priotities in order Rudz! Cant say the same for A-Tac :confused:

I think the NJ-trans scare got him rather worried. LOL!
Yeah your right! Packing, demoing, and prepareing for our new 3000 sqf. prefab home to show in the first week of May should take a back seat. :rolleyes: My bad, my priorities lack.

[p8ntbal4me]

Yeah your right! Packing, demoing, and prepareing for our new 3000 sqf. prefab home to show in the first week of May should take a back seat. :rolleyes: My bad, my priorities lack.


Well,.. at least you can see the error of your ways!

LOL!


Go get em Rudz!

[Thanna]

I do like the finger grooves in front, like the ones on the tunapack battery case. Would it be too much to ask for to have one made that way when you do put these out?

[Ninjeff]

Indeed. finger grooves in front would really sell the piece.

What wonderful things could you put up front there?.......

[snoopay700]

Indeed. finger grooves in front would really sell the piece.

What wonderful things could you put up front there?.......
Well you could always put your lunch in there.

[jay8541]

you can put a few snacks in there ( LPR'S ,electronics ,a very small person , ETC)

as far as the finger grooves we can look into that as well we will do a few regularly for now and then we will possible do some like that

[snoopay700]

you can put a few snacks in there ( LPR'S ,electronics ,a very small person , ETC)

as far as the finger grooves we can look into that as well we will do a few regularly for now and then we will possible do some like that
That was awesome, made me laugh. Also, you can put money and stuff in there so no one steals it while you're playing and so you don't lose it.

[Pneumagger]

Indeed. finger grooves in front would really sell the piece.

What wonderful things could you put up front there?.......

You could fill it with "magic 8 ball" liquid and put the answer polygon in there... :ninja:

Player: [shakes gun] "Should I bunker that kid up there?"
Gun: "Unclear. Ask again later"
Player: [shakes gun again] "Should I bunker that kid up there?!?!"
Gun: "Outlook not good" [at that moment the player gets bunkered]

/i take no credit for the originality of this answer

[shorty24]

Indeed. finger grooves in front would really sell the piece.

What wonderful things could you put up front there?.......

A tazer for those sneaky unsuspecting cheaters. Or just in case you may run across DM in your paintball adventures...

[jay8541]

OK guys pics are up

[Mongoose]

OK guys pics are up
very nice :hail:
any ideas on the price?

[Rudz]

hot, i love the new piks

[jay8541]

very nice :hail:
any ideas on the price?


No price set yet and i will post a price and everything in the dealer section when we are going to sell them just keep posted

[geekwarrior]

Indeed. finger grooves in front would really sell the piece.

What wonderful things could you put up front there?.......

pnuemag it and put a small EMP?

looks good jay :headbang:

[p8ntbal4me]

OUTSTANDING DEVIL!!!

Chesty would be proud to see such a product of the Corps!!!!!!!!!

Here,.... have a banana! :dance:

[p8ntbal4me]

pnuemag it and put a small EMP?

looks good jay :headbang:


Or,... or,... orr,....

eh. Lost my trade of though.

Come to Tunaball,.... I should have it back by then! ;)

[CKY_Alliance]

May have been suggested already, but you could probably save a good bit of weight if you cut all the excess metal from inbetween the trigger guard and the forgrip...looks good though.

[p8ntbal4me]

May have been suggested already, but you could probably save a good bit of weight if you cut all the excess metal from inbetween the trigger guard and the forgrip...looks good though.


Not pointing a finger at you CKY,.... remember everyone that these Storm Walk frames are PROTO-TYPES. So Jay might need the input of us to help change it a bit to sell more of them for something we want to shoot.

I like and dislike things about it. No matter what he puts out, he cant please 100% of us.

Good thing is, hes willing to take the time and do it right.

Jay, my suggestion/question is: Pannels. What are you doing for these? Metal or something else like rubber? Are you going to do some design on the metal pannels if you do those?

[jay8541]

Not pointing a finger at you CKY,.... remember everyone that these Storm Walk frames are PROTO-TYPES. So Jay might need the input of us to help change it a bit to sell more of them for something we want to shoot.

I like and dislike things about it. No matter what he puts out, he cant please 100% of us.

Good thing is, hes willing to take the time and do it right.

Jay, my suggestion/question is: Pannels. What are you doing for these? Metal or something else like rubber? Are you going to do some design on the metal pannels if you do those?


Panels for Tuna ball we are going to have one with clear ackrillic panels front and back with the tribal design and a set of front and rears in aluminum with the tribal design

[Mongoose]

Panels for Tuna ball we are going to have one with clear ackrillic panels front and back with the tribal design and a set of front and rears in aluminum with the tribal design


Ahh cyberave68 panels??...this is why my project is taking so long...jk
he is making me a set of custom panels for my Venomag....they are sick!!!!

[El Presidente]

http://i68.photobucket.com/albums/i15/jay8541/Picture748.jpghttp://i68.photobucket.com/albums/i15/jay8541/Picture750.jpg



This is a good example of what NOT to do to a mag. Sorry for the harsh critique, but if I remember way back when I used to come here often, the biggest complaint about the emag was that gigantic blocky battery box in the front of it. Does anyone like it?

Concept gets an A, but the execution gets a F

back to the drawing board...

[Mongoose]

This is a good example of what NOT to do to a mag. Sorry for the harsh critique, but if I remember way back when I used to come here often, the biggest complaint about the emag was that gigantic blocky battery box in the front of it. Does anyone like it?

Concept gets an A, but the execution gets a F

back to the drawing board...
I gotta disagree with you...i think it looks great and the possiblities are endless :hail:
think of all the great things you can put in there

The only concern i have is the weight of it. and some finger grooves would be great!

But your entitled to your opinion.....so i guess i wont see your name on the preorder..

P.S have you seen there airwalk?

[Rudz]

cant dp finger grooves, the frame is gas thru...

[Mongoose]

cant dp finger grooves, the frame is gas thru...
Keep it solid, but just some indents better said

[Bigman]

I like it, maybe next you could make an idiot proof Pneu-Mag kit, just have parts all seperate order and the frames pre-drilled for it...
Also with a frame like that wonder how hard it would be to figure out some electronics...

[Mongoose]

I like it, maybe next you could make an idiot proof Pneu-Mag kit, just have parts all seperate order and the frames pre-drilled for it...
i believe this frame is all ready to go for a pnuemag...just add the parts "there is a few threads that tell you everything you need.

[cyrus-the-virus]

pump kit....?......please?

[Rudz]

i believe this frame is all ready to go for a pnuemag...just add the parts "there is a few threads that tell you everything you need.


of course, wouldnt wanna anger anyone by selling a complete production pnue frame or ep frame now would we?

[jay8541]

pump kit....?......please?


yes yes they are coming

[jay8541]

This is a good example of what NOT to do to a mag. Sorry for the harsh critique, but if I remember way back when I used to come here often, the biggest complaint about the emag was that gigantic blocky battery box in the front of it. Does anyone like it?

Concept gets an A, but the execution gets a F

back to the drawing board...



ARE you asking in general if anyone likes the emag battery pack or if anyone likes my design

OK about the emag comment, I beleive the biggest complaints with an emag was one the weight issue that was caused by the how heavy the battery it self is so we eliminate the battery and we are now lighter

the other reason some people dis like the emag lowers in general is the actual trigger frame part of the emag . They have that hump that some do not like so we took it out and added a more styllish frame.

Also you dont need to add any pneumatics or electronics for this mechanical frame to work there for again it is lighter. But as we know you can put all the goodies you want in there and you still dont have the extra weight from the emag battery. We also tried to eliminate the blocky look to the front by making it all one piece

Thank you for your critique it is not harsh and i like your honesty, just starting off the thread with "This is a good example of what NOT to do to a mag" is alittle ignorant considering what you can do with this.

[Rudz]

atta boy marine!!! let em have it!!!!!!!! :mad: :shooting: , i dont care what anyone says, i love it!

[Walrus]

I would agree with jay...people don't care for the weight of the Emag, not the battery pack. I like the pack because it acts like an integrated foregrip. In fact, it must have been such a good design the Mini has the same setup.

I love the new products for Mags that jay is taking the time and effort to create. If you don't don't seem to like that is okay...everyone is entitled to their own opinion...but if you think you can do better just go ahead and knock yourself out and present us with another option besides this product.

And don't knock the manufacturer who spends his own time and money creating something for a product that I hope you own. Because I don't see too many other options out there that can do what jay's products are advertising and doing :dance:

Love the work jay...keep it up :cheers:

[Paintchucker]

the other reason some people dis like the emag lowers in general is the actual trigger frame part of the emag . They have that hump that some do not like so we took it out and added a more styllish frame.



I found it very ironic that the AGD world ULE'd the hump off, and then the rest of the world fell in love with TonTon GripFrames, even putting that design on IONs...


I like the design, and notice someone said "acrylic grips" ??? Who is making those?

[jay8541]

I found it very ironic that the AGD world ULE'd the hump off, and then the rest of the world fell in love with TonTon GripFrames, even putting that design on IONs...


I like the design, and notice someone said "acrylic grips" ??? Who is making those?


Cyberave68 makes all my panels for me He has many options to choose from

these frames with be offered with

red,Blue or clear ackrillic panels with either a smooth finish or his tribal design
Also all aluminun either smooth or tribal

[zazzoo]

Very sexy frame good job as always

[flyingpootang]

Jay If you do a SpaceMag I'll be all over it....Please

[MANN]

Jay you have really over done yourself on this one. I am going to try to download aim again. Catch me there if you have a min tonight

:cheers:

[jay8541]

Jay you have really over done yourself on this one. I am going to try to download aim again. Catch me there if you have a min tonight

:cheers:

ok I will try to catch you Friday Night

[Dark Side]

As always good looking and functional. Great job.

[Bigman]

So could someone say take they're e-mag guts, out them into this frame and work just as well?

[tech-chan]

I just had an orgasm. :dance: :dance:

[jay8541]

So could someone say take they're e-mag guts, out them into this frame and work just as well?


no Bigman this will not accomadate emag parts, the emag board,trigger internals
and battery will not fit. this Mechanical frame was designed with pneumags and electro pneumag conversions in mind as for me I will have one mech and one EP (in the works)

[p8ntbal4me]

ThisMechanical frame was designed with pneumags and electro pneumag conversions in mind as for me I will have one mech and one EP (in the works)


Ohhhhh REALLLY!??????? ;)

[jay8541]

http://www.automags.org/forums/showthread.php?t=213935 well guys if you have not seen it yet here are some of the possibilities the frame can be used for

[Rudz]

http://www.automags.org/forums/showthread.php?t=213935 well guys if you have not seen it yet here are some of the possibilities the frame can be used for


o rly?

[SR_matt]

looks cool (kinda bulky over all but very cool idea IMHO.

im confused how the air is supposed to run in that front pasage. does it go in the bottom and out the top or are you supposed to have to run a nother line inside inbetween the top and bottom?

-matt

[jay8541]

looks cool (kinda bulky over all but very cool idea IMHO.

im confused how the air is supposed to run in that front pasage. does it go in the bottom and out the top or are you supposed to have to run a nother line inside inbetween the top and bottom?

-matt


the air connection macro fitting or ss steel can tap into the left ,right or bottom of the front pack. it then travels through the front of the pack to the top air ports they are all linked internally together. if you want to go pneumatic or electronic or both you can run your wires and hoses throught the frame from the back of the frame to the front so everything is internal

I hope that helped because it can be confusing to explain

[SR_matt]

the part i am confused about still is do you need to put a line inside that front grip still if you run it in teh bottom or does it run through an unseen path?
-matt

[jay8541]

the part i am confused about still is do you need to put a line inside that front grip still if you run it in teh bottom or does it run through an unseen path?
-matt


no you do not need to put anything inside the front grip, there are air holes internally that you do not see from the out side

[The Hellforger]

how much for this bad boy?

pm me a price cause i want one for my minimag bad!!!!!!! :shooting: :shooting: :shooting: :shooting: :shooting: :shooting: :shooting: :shooting: :shooting:

[TnDeathInc]

how much for this bad boy?

pm me a price cause i want one for my minimag bad!!!!!!! :shooting: :shooting: :shooting: :shooting: :shooting: :shooting: :shooting: :shooting: :shooting:


when qill you be taking orders and where to get them?

[MaD_SaM]

Yes when will you have an order thread for that bad boy? dont want to miss out on this one. Thank You for coming out with something new! :headbang:

[jay8541]

I will be taking pre orders May 6th or 7th after TunaBall Price is not set in stone. I will post it all in the dealer section on that Sunday the 6th or monday the 7th not sure on the amount either probably 25-50 then I move on to the next project so dont miss out.

[jay8541]

updated pics of some panels

[Coralis]

I sure do like those clear grips , they look great

[MaD_SaM]

I will be taking pre orders May 6th or 7th after TunaBall Price is not set in stone. I will post it all in the dealer section on that Sunday the 6th or monday the 7th not sure on the amount either probably 25-50 then I move on to the next project so dont miss out.


Sounds good ill be on the look out. Ooh STORMWalk and a Karta :headbang: Cant wait!

[BigEvil]

Sounds good ill be on the look out. Ooh STORMWalk and a Karta :headbang: Cant wait!


Stormwalk+ Xmag body > Stormwalk + Karta

:-)

[SummaryJudgement]

Stormwalk+ Xmag body > Stormwalk + Karta

:-)

Pics? I was thinking about putting my Karta on one. I've seen the Dallara body on the frame, but are there any of a Karta or Xmag body on a Stormwalk?!

[jay8541]

Pics? I was thinking about putting my Karta on one. I've seen the Dallara body on the frame, but are there any of a Karta or Xmag body on a Stormwalk?!


uploading them now

[BigEvil]

Pics? I was thinking about putting my Karta on one. I've seen the Dallara body on the frame, but are there any of a Karta or Xmag body on a Stormwalk?!


There will be :ninja:

[txaggie08]

so jay will you start producing pneu-frames now that they will license them?

[p8ntbal4me]

Did I miss something here?


so jay will you start producing pneu-frames now that they will license them?

[Rudz]

yall see pnuematics in that frame? i sure dont, just a frame with some 1/8 npt holes and a gas thru frame..

[txaggie08]

Did I miss something here?

http://automags.org/forums/showthread.php?t=214198

wondering if we'll see a factory direct one from him......

*poof* I can't ask questions....


Wait WA? I just put asterisks, not trying to avoid anything(it didn't auto-edit when i typed it the first time so I did it myself............). Not gripping just trying to figure it out.......

[jay8541]

so jay will you start producing pneu-frames now that they will license them?


no I only make mechanical parts I leave that up to other people , I try not to get involved. there is to much RED tape, paintball is suppose to be fun and it some times turns in to a political battle. I am here trying to help out and play some PB as soon as I am not having any more FUN I will pack up and leave. whether I make 33 or 1000 parts. Sorry I kinda got off topic it is early and I am cranky.

(ANd if I have my SFL still when the time comes I will burry it so RUDZ can't find it)

[jay8541]

http://www.automags.org/forums/showthread.php?p=2356213#post2356213

Pre order is up