about sears

[nathanjones008]

does the new ule rt and the pro classics come witht he same sear assembly size? Does the ule rt seer differ from a classic sear?

thanks in advanced

all comments are welcome

[Tao]

does the new ule rt and the pro classics come witht he same sear assembly size? Does the ule rt seer differ from a classic sear?

thanks in advanced

all comments are welcome

No. The sears are different inthe way they sit on the rails. There are two types of rails Automag/minimag and RT. The automag/MM sear has a buit in pin that sits in a cradle in the AM/MM rail. The RT sear has a hole in it for a pivot pin which is screewed into the side of the RT rail and ultimately through the sear as well.

AM/MM sear: This: http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=414&categoryID=92 and this http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=406&categoryID=92

RT sear: This http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=416&categoryID=95 and this http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=154&categoryID=95

Unfortunately you can't see the hole in the RT rail where the pivot pin goes into in the pics on AGDs store.

Note: this only matters to match up the right sear to the right rail. Any triger frame or any mainbody or any valve (except for classic RT stuff) can be swapped between RT pros and Classic automags or minimags with no modifications.