10 drops of oil through the valve...

[mostpeople]

and now my marker chrono's from 250 - 280.. why the big difference?


I also put oil on the spring and the lvl 10, and the ULT...

I didnt mess it up did I??

[Russ]

and now my marker chrono's from 250 - 280.. why the big difference?


I also put oil on the spring and the lvl 10, and the ULT...

I didnt mess it up did I??


and now your barrel if full of oil!

wipe down the bolt, clean the barrel, and you'll be OK

[mag_lover05]

5 drops of oil in the ASA, dry fire about 50 shots with the barrel off, and your good to go...10 is a little much

[mostpeople]

ok lol...

yeh... is it wrong to do then: 5 drops in the ASA + 1-2 drops on the bolt and 1-2 on the spring?

[Nick E]

5-10 in the asa and NONE on the bolt or spring. that's more than likely you're problem.

[mag_lover05]

5-10 in the asa and NONE on the bolt or spring. that's more than likely you're problem.


yea, unlike most high end guns these days mags dont need anything on the bolt (and why oil a spring?)

[olinar]

since your gonna pull the valve out, this would be a good time to I've the valve a good cleaning with a q tip and replace worn o rings, oil the internals appropriately and then put it back together. then a few drops in the asa and it should be good.

[pierce]

Since you gave it a oil change, don't forget to get the grease gun out, find the zerk fitting, :dance: and give it 3 good pumps! :dance:

[mostpeople]

huh?

theres grease in there?

[StygShore]

Nope... Pierce is just being a jerky jerk jerk....



Styg

[pierce]

Sorry, i just couldn't hold it back. :)

[ProblemKinder]

Since you gave it a oil change, don't forget to get the grease gun out, find the zerk fitting, :dance: and give it 3 good pumps! :dance:

thats funny.

and mean.

dont oil the bolt, i made that mistake. also, don't apply oil directly to the ULT (or atleast, not too much) I did that and my gun wouldnt stop firing full auto till it got the excess oil out of itself.