E-Mag on/off, now what?

[yaaaowHuggs]

So i got my e-mag on/off to replace my rt one, hoping to fix my problem. i still can't shoot in e-mode, works fine in mech. the hall effect seems to be working (the trigger on/off electric display works) so now what? :cry:

[Tunaman]

Charge your battery overnight then check the voltage in the morning. 18.5-20 volts should be the voltmeter reading.

[yaaaowHuggs]

aye aye captain! :headbang:

[flyingpootang]

If that dosen't work check your board grounding screw is snug, make shure your plunger rod isn't bent/loose, and clean out your noid with electrical cleaner..

[yaaaowHuggs]

solenoid glides freely, made the plunger 3.005+ and charged the battery.
still nothing!!! :cry: !!!

[yaaaowHuggs]

anybodyyy?

[Spider-TW]

Do you have a voltmeter? You might check the AO threads on emag battery packs. Does the solenoid try to work?

[yaaaowHuggs]

it clicks when theres no air in it, but not when i air it up

[yaaaowHuggs]

and my battery reads 18+ on the voltmeter

[Tao]

and my battery reads 18+ on the voltmeter

All I can think off....: it won't shoot when you have it on the "on/off" test on the board. It will read on/off" when you pull the trigger but won't fire the gun.

[yaaaowHuggs]

ooo, i know that. i was just saying thats how i know its not the HES, i try firing in just e-mode and nada. could it be my solenoid? thats all i can really think of... and that sucks!

[yaaaowHuggs]

i just need to know if its my noid, thats a pretty easy thing to replace right? just solder 2 wires into the board? if its not my noid, someone PLEASE point me in the right direction!!!

[Tunaman]

sure the safety is off? ;)

[flyingpootang]

Is the magnet in the middle of the trigger to close or to far from the HES? Is it coroded?

edit: Is it in the correct polarity? You can remove the hes and use another magnet to try and activate it. Try both nort and south poles