Your max bps with a mag?

[commrad]

No crap, no estimates, WITH PAINT ONLY!!!!

No BS, just straight up what's your mag shoot?

:headbang: :shooting: ------------------------------------- :cuss:

[shorty24]

hmm, too bad it's with paint only. I had a vid goldwaved of my pneumag doing 29 cps, sold it before I ever made one with paint...

[matteusz]

5 bps stock single trigger CF frame on a minimag. :rofl:

[Jimmykaboots]

5 bps stock single trigger CF frame on a minimag. :rofl:

At least you get more than me! 4 bps, double trigger Dye frame.

[Spider-TW]

19 bps on an x-valve without trying, verified and punched by the field judge.

[Ninjeff]

7 bps with Classic valve lvl 10 and intelliframe.

[dropzone]

Not really sure but even the new Pulse hopper wont keep up. X-valved R/T ULE custom with a maxflo 1,200 psi output. :argh:

[Badger1099]

I clocked myself at 9 bps with my double trigger Classic RT at the chrono range.

[Rudz]

we had my sfl dry firing at 26 w/ xmod software..and a preset centerflag..plus a few tweaks here and there...when i get some air ill put paint through it, and btw the pulse has been clocked at 35 bps...


sorry i thought it was the guns bps..my max bps is about 12 on my xmag

[biggie]

7bps minimag with double trigger.

[commrad]

I'm not sure about every one else but it's great to see what real players are getting instead of what companies that are trying to sell you something say.

My classic - 7-8
Classic with Boo-Yaah - 11 on compressed air
Xvalve, lvl 10, T-board Hyper frame 15bps (tank limited, new tank on the way)

[AGDRetro]

I've had my X-Valve & ULT'd Karta up to 17 with paint over the chrono. With 1000 psi input it was too easy. Now use a Crossfire 850 psi preset tank and still manage a much safer & more controllable 12-14 bps. Still shoot more in a day than I ever did with my eBladed SFL! This is using an Intelliframe with RPG Viperblade of course :D

[D3ath ADder]

Paradigim Pro, blade trigger.

Probably 5 ish, I am rubbish but working on improving. That thing can go much faster

[luke@york]

m mates was goldwaved at 19bps with paint with a adjustable reg with high input on a paradigm pro x valve ult etc, iv got a vid somewhere ill dig it out


i think mine is a little faster tbh but cant verify it, bang 1100psi into it goes thru boxs of paint lol, will get mine videoed at the next walkon/ tourney i think.
luke


ninja edit..... heres the vid, ill find the goldwave in a bit
http://www.youtube.com/watch?v=GYEwRRK5NWI

[LegumeOfTerror]

my onuemag bounces around betwwn 12 and 15 on the red chrono thing

[commrad]

finally got the shims for my PE tanks :dance: 1020psi out

18bps classic, hyper frame with T-board, halo b/rip, diamond labs 8 hole blue reg body, RT on/off, lvl 7

I need a v35 for my halo, at 19 it wouldn't feed, maybe low batteries

CAN"T wait to get this frame back on my Xvalved mag and put the boo-yaah back on the classic :D

T-board + HPA + Mag = :dance: :cheers:

[Tao]

Her a thread where a reply from TK would be intersting.... :bounce:

[skife]

between 4-6 on my intelli classic

[Badmovies.org]

Both of these were over a chrono, involving long sustained strings, using a Flatline regulator turned up to 1200 psi on an x-valve. Oh, and using an RPG Splinter Pro trigger on an Intelliframe.

Sweet spotting - 22bps

Walking - 14 bps

When walking it, I am often getting bursts off my one finger. After turning the pressure down to about 1000 psi to ensure I was not getting short bursts, my bps was 8. Playing with the input pressure changes the feel of the trigger for walking it. With the trigger set at 1100 psi (now my default), I was getting a repeatable 10 bps after some practice.

[punkncat]

With an RT on/off in an Xvalved mag, adjustable tank set at around 1200PSI, I was outshooting my ReloaderB on speed three. I suppose thats something in the 25ish neighborhood.