PDA

View Full Version : Mag outshooting halo (video)


Pneumagger
05-26-2007, 01:05 PM
So I finished the EP Mag I've been working on and finally got the camcorder out.
It has a predator board in it and I was shooting it on "hyper mode" (shoots on pull and release) to see how fast the gun would get going. Little did i know that all I would end up doing was max out the loader. The loader cant sustain much more than 20bps bursts for more than .70 seconds or so. The batteries were good in everything and I had 3000 psi in the tank. Also, the paint was 100% crap, and after the 1st barrel break it was shooting like a 5 foot radius :tard:

Micro Maxflo @ 800psi
Xvalve Level X (the LX could've done etter and saved me some cleaning :( )
Dwell, 18ms
Mode, Hyper
No Eyes
No QEV

Overall It was a blast to shoot. I know it will keep up with the 15 bps fields limits with ease anyways. :cool:
VIDEO HERE (http://s53.photobucket.com/albums/g45/jrm33/Mag%20Projects/?action=view&current=EPAutomag.flv)
http://i53.photobucket.com/albums/g45/jrm33/Mag%20Projects/100_2896.jpg
http://i53.photobucket.com/albums/g45/jrm33/Mag%20Projects/100_2899.jpg
http://i53.photobucket.com/albums/g45/jrm33/Mag%20Projects/100_2900.jpg
http://i53.photobucket.com/albums/g45/jrm33/Mag%20Projects/EPmag.jpg
JH_
05-26-2007, 01:10 PM
Very nice. Do the different parts that are green match? They don't look like it in the first picture.
rkjunior303
05-26-2007, 01:17 PM
looking good!

now see, thats innovative. and i like those airwalk frames -- get eyes in that sucker!!
cyrus-the-virus
05-26-2007, 01:36 PM
ok who do I send my airwalk frame too to get that.....
Southpaw
05-26-2007, 02:50 PM
I would like to know what the specific components are and where to order them :D I have been contimplating this or a pneumag but I have a old morlock (sp) that I think I could make work with this.
Lenny
05-26-2007, 03:44 PM
So, Joe, when will I finally be playing with my EP 'Mag? Hmm? :p
warbeak2099
05-26-2007, 08:14 PM
Is that a sammich or rolled up pizza slice?
Badmovies.org
05-26-2007, 08:14 PM
Very nice looking marker. I've noticed that I can outshoot my loader, a Vlocity, too. Once I get up around 20 bps, I get chuffs now and then.

Makes the claims of the manufacturers rather interesting, does it not?
Pneumagger
05-26-2007, 08:18 PM
Is that a sammich or rolled up pizza slice?

My little bro's freind raided the pepperoni roll stash :(
Papa_Smurf
05-26-2007, 08:21 PM
You should throw a Qloader on and see what she'll crank out with paint!
BigEvil
05-26-2007, 08:22 PM
How's that noid holding up? I killed two of them already :-(
Pneumagger
05-26-2007, 09:53 PM
How's that noid holding up? I killed two of them already :-(

were you using ULT or not? This one doesn't have ULT in it now and mpsd is considering getting a ULT to releive some stress from the noid.
wimag
05-26-2007, 11:18 PM
credibility lost and all seriousness not there with the tool stuffing his face. hey...
Southpaw
05-27-2007, 12:44 PM
what noid? part number and manufactuer?
SummaryJudgement
05-27-2007, 03:04 PM
Nice job Pneumagger!
BigEvil
05-27-2007, 06:11 PM
were you using ULT or not? This one doesn't have ULT in it now and mpsd is considering getting a ULT to releive some stress from the noid.

Yeah I did. The whole set up topped out at 20 bps regardless of mechanics or board parameters. I picked up one of those mac noids - which lasted about 10 minutes. I found out that there was a recal on a defective batch of them that went out via ASP so I am awaiting the arival of my replacemet.
CaliMagFan
05-28-2007, 01:07 PM
nice marker.. .nice snack- life is good.
Chrishew09
05-28-2007, 02:46 PM
Why EP why not all electro? (noid push/pull sear)

I will take a guess b/c a smaller noid is required that draws less current?
mpsd
05-28-2007, 03:56 PM
IT'S DONE!!!! :shooting: :shooting:

AND THE BEST THING ABOUT IT: IT'S MINE!!! HAHAHAHAHAHA :dance: :bounce:

THANKS JOE! YOU'RE THE BEST!!!! :headbang:
minimag03
05-28-2007, 04:06 PM
This is good