Another Hyper frame question

[wooky]

Is their any way to tell which Hyper frame someone has by just looking at it? Meaning if it is a semi, 10,13 or a 20 round auto? Or do you actually have to have it in your hands and turn it on to find out?

Thanks

[Madmarx]

I think they all look the same on the outside.
I've had a couple and the only way I could tell was to turn it on.

[wooky]

I think they all look the same on the outside.
I've had a couple and the only way I could tell was to turn it on.


I was afraid of that, so let me ask you. What would one be worth BNIP worst case, if you did not know which one it was?

Thanks

[Madmarx]

I sold a used 13 bps that had a messed up screw hole for the drop for 75
I would say 100 would be a deal on a bnib
Depends on wht you want really
If it's only semi and you wanted burst then...
A 13bps w/ modes would be $125 and up

[wooky]

I sold a used 13 bps that had a messed up screw hole for the drop for 75
I would say 100 would be a deal on a bnib
Depends on wht you want really
If it's only semi and you wanted burst then...
A 13bps w/ modes would be $125 and up


Thanks for the info.

[Coralis]

I wouldnt let my used hyperframe with 13 bps board go for less than 200

[hmudd13]

There have been a few on Ebay lately, and it seems they are going for $150+ no matter what kind they are.
I have 2, one 13 and a newly aquired 20.
The 13 has semi, burst, and hyper
the 20 has FULL AUTO YUMM :D

[wooky]

There have been a few on Ebay lately, and it seems they are going for $150+ no matter what kind they are.
I have 2, one 13 and a newly aquired 20.
The 13 has semi, burst, and hyper
the 20 has FULL AUTO YUMM :D

So if you dont mind me asking what valve are you using? Have you tried it on a classic valve and if so how well does it work?

Thanks

[Coralis]

I use mine on a classic valve with the ult and it works just fine.

[custar]

I thought the Hyperframe came with a weaker solenoid than an e-Mag frame and consequently requires a specific on/off or a valve with ULT. I picked up a Hyperframe on a Galactic Z body inexpensively. Later, I found out the owner was ditching it because the Hyperframe wouldn't reliably activate the stock Classic valve he had in the marker.

custar

[Coralis]

I had alot of problems with my hyperframe not working properly until I put in the ult. It worked pretty well for about a year with the Rt on/off and then one poof one day it just decided no more I fought with it for a couple of years before giving a ult a chance.

[hmudd13]

So if you dont mind me asking what valve are you using? Have you tried it on a classic valve and if so how well does it work?

Thanks
I have the 13 on an X valve, and the 20 on an Emag valve. I fired it on full auto at 20 bps, and it's insane. I set it at 16, for posterity. :D

[hmudd13]

I thought the Hyperframe came with a weaker solenoid than an e-Mag frame and consequently requires a specific on/off or a valve with ULT. I picked up a Hyperframe on a Galactic Z body inexpensively. Later, I found out the owner was ditching it because the Hyperframe wouldn't reliably activate the stock Classic valve he had in the marker.

custar
Yep, it needs either the center flag on/off or a ULT.
My Emag valve had the regular RT on/off, and it would fire once or twice, and stick for a second. Dropped in a ULT and WOOO HOOO!!!