View Full Version : No Pressure when i pull down on the trigger
GallagherAtWar
01-07-2002, 09:50 PM
Hey i just got a automag in an auction. When ever i hook up gas i hear the sound it makes when it gases up (click) then i pull the trigger and the trigger is limp nothing happens. There is air in my tank and the tank works fine. The grip i have is a benchmark. Does anyone have any idea what could be the problem
Thanks alot
David Shirley
Be sure that the trigger rod is comming out where it should be. It is possible to put the frame on in such a way that the trigger rod won't hit the trigger were it is supposed too. Just be sure when you put the frame on that the rod can get through to the back of the trigger.
Turn up your velocity also.
MajorDamage
01-08-2002, 01:28 AM
You also may want to send the gun into AGD to get the rod adjusted to the proper length for a benchmark frame, because it is a little diffrent than the standard one I believe.
ENDO!
GallagherAtWar
01-08-2002, 06:05 PM
I figured out what the problem was. I had to turn up velocity becuase not anough was going to trigger.
Thanks Guys
David Shirely
I have had that happen. What Jon at AGD told me to do was turn up the velocity. This worked and the problem never came back.
GallagherAtWar
01-10-2002, 06:18 AM
This was my brother who posted this. and i was the one to fix it.
I saw that the piston was in backwards so i fliped it and it worked prefectlly
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.