View Full Version : Hyperframe + Classic Valve
Mercenario
06-25-2007, 11:14 AM
Do you have to have the Centerflag on/off for the frame to work properly on a classic valve?
If not what other on/off would work?
Madmarx
06-25-2007, 11:20 AM
I run the center flag on/off, but I have been told a ult will also work.
I could test it with a ult after work if you haven't heard anything else.
Coralis
06-25-2007, 06:51 PM
i use mine with the ult works great on both my valves
Mercenario
06-25-2007, 08:02 PM
Thanks
chill will
06-27-2007, 12:12 AM
try an RT on/off
kcpaintballpage
06-27-2007, 09:52 PM
A Rt on/ off works with my minimag valve and hyperframe
flyingpootang
06-27-2007, 11:06 PM
I used a RT on/off with a .750 pin. The original/first run center flag on/off chewed up the bolt.
commrad
07-15-2007, 01:55 PM
I tryied the ULT in my classic with the a hyperframe, no luck, could not get the balls over about 75 fps with out air leaking out the back, a new reg piston woulda fixed it but I threw in a .750 RT on off and it worked like a champ.
the RT on off all so works with the boo yaah I have on the classic now and works well as long as you have a good battery.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.