OLD with a capital Z OLD Phantom

[mobsterboy]

Buddy of mine said he got it when he was 15... Well he's 28 now, and he said it was a few years old then so We're looking at pretty flippin old.
Right feed body with built on barrel all one piece. The frame, now maybe I'm just not well versed on phantoms, but the frame is definitely not ULE by any means. Very solid and heavy. The Valve has a built in back bottle adapter and is angled. Shoots like a champ.

http://img213.imageshack.us/img213/7673/img0700ea1.jpg (http://imageshack.us)

http://img524.imageshack.us/img524/393/img0702pn1.jpg (http://imageshack.us)

[z1p101]

Can you still get power tubes, cup seals and spring kits for those old pump guns?

I have been out of the loop for a long time.

[mobsterboy]

I believe CCI still makes phantoms so I dont see why you couldn't

[neppo1345]

Can you still get power tubes, cup seals and spring kits for those old pump guns?

I have been out of the loop for a long time.

Naw, the new powertube is a lot shorter...

I ran into that problem when I went to rebuild my old unibody a few months ago.

I think the guy who gave it to me told me he won it at a tourney in 1990...

If you need parts call CCI and talk to Mike, or his wife.

[Skeeter]

Can you still get power tubes, cup seals and spring kits for those old pump guns?

I have been out of the loop for a long time.


Yep. You can still get all of the parts, but if you upgrade the power tube, you need to get a new bolt (tuned port compensator) as well. The hammer might be the same across generations, but check with Mike @ CCI to verify.

The new cup seals might not fit the old valve/PT assembly, so that may need to be swapped out as well.

Shouldn't need spring kits with a newer bolt. Velocity adjustment is down the barrel with the appropriate adjustment tool (or a very long standard screw driver).

[z1p101]

But I need the parts for an old Lapco Spectre which has a bore drop bolt and I believe the fhantom uses a breech drop bolt so I can't swap the bolts.

The power tubes and springs used to be interchangeable for any nelson based gun and I will need the old stuff.

[z1p101]

I think that carter (http://cartermachine.com/) may be able to help with problem if anyone has this problem in the future.