Xvalve bolt leak

[hoarse]

Hey guys, I have a leak which seems to be leaking from behind the bolt. When I hold the trigger in the bolt is all the way back and leak stops, when the trigger is released the bolt pops forward a little and it starts leaking again. Could this be a worn sear maybe? any help would be appreciated.

[SR_matt]

no the bolt should "pop" forward slightly. oil, shoot a lot and if it is still there check the anti chop function (i am assuming its lvl x since its an x valve). if the anti chop is working right go down a carrier size but remember to use the same carrier oring.

in my experience i broke the gun down and tried to swap everything one way and another and ended up back at the original stuff i had when i started just because there was some dirt or stuff wasnt seated correctly.

hope this helps
-matt