matteusz
09-08-2007, 12:27 PM
Couple of important tips for those who ordered a logic UMF and some pics to identify the bits and pieces.
For fun:
<a href="http://www.putfile.com/pic.php?img=6541299"><img src="http://img2.putfile.com/thumb/9/25013253712.jpg" alt="Click to enlarge"></a>
<a href="http://www.putfile.com/pic.php?img=6541298"><img src="http://img2.putfile.com/thumb/9/25013253718.jpg" alt="Click to enlarge"></a>
You should be getting a bag of parts that looks something like this (plus or minus anything already installed):
<a href="http://www.putfile.com/pic.php?img=6541300" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253722.jpg" alt="Click to enlarge"></a>
Other than the obvious trigger and frame these are the parts:
Trigger stop screw
<a href="http://www.putfile.com/pic.php?img=6541301" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253719.jpg" alt="Click to enlarge"></a>
Use at YOUR OWN RISK. AGD does not recommend the use of trigger stops and you should be aware that they can cause undue wear or damage to your marker.
Trigger rod contact screw
<a href="http://www.putfile.com/pic.php?img=6541303" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253897.jpg" alt="Click to enlarge"></a>
Like your trigger rod this needs to be properly adjusted for your marker to function as designed.
Grip screws (4 come with each frame)
<a href="http://www.putfile.com/pic.php?img=6541302" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253731.jpg" alt="Click to enlarge"></a>
Bottom Line Mount Screws
<a href="http://www.putfile.com/pic.php?img=6541304" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253882.jpg" alt="Click to enlarge"></a>
For fun:
<a href="http://www.putfile.com/pic.php?img=6541299"><img src="http://img2.putfile.com/thumb/9/25013253712.jpg" alt="Click to enlarge"></a>
<a href="http://www.putfile.com/pic.php?img=6541298"><img src="http://img2.putfile.com/thumb/9/25013253718.jpg" alt="Click to enlarge"></a>
You should be getting a bag of parts that looks something like this (plus or minus anything already installed):
<a href="http://www.putfile.com/pic.php?img=6541300" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253722.jpg" alt="Click to enlarge"></a>
Other than the obvious trigger and frame these are the parts:
Trigger stop screw
<a href="http://www.putfile.com/pic.php?img=6541301" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253719.jpg" alt="Click to enlarge"></a>
Use at YOUR OWN RISK. AGD does not recommend the use of trigger stops and you should be aware that they can cause undue wear or damage to your marker.
Trigger rod contact screw
<a href="http://www.putfile.com/pic.php?img=6541303" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253897.jpg" alt="Click to enlarge"></a>
Like your trigger rod this needs to be properly adjusted for your marker to function as designed.
Grip screws (4 come with each frame)
<a href="http://www.putfile.com/pic.php?img=6541302" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253731.jpg" alt="Click to enlarge"></a>
Bottom Line Mount Screws
<a href="http://www.putfile.com/pic.php?img=6541304" target="_blank"><img src="http://img2.putfile.com/thumb/9/25013253882.jpg" alt="Click to enlarge"></a>