Automag angel threaded feednecks..

[mostpeople]

Anyone ever use this one with a haloB?

http://cgi.ebay.com/Feedneck-CCM-New-Angel-Black-Black_W0QQitemZ150138546978QQihZ005QQcategoryZ1055 4QQtcZphotoQQcmdZViewItem

if so do you reccomend it? Im thinking about getting it to put on meh dallara

[rkjunior303]

CCM, BP or FBM FTW.

[mostpeople]

I prefer ultra low rise, and this looks pretty low to me heheh, I just wanted to make sure it works well with the halo B and dallara mainbody before I sink 40 bucks into a little think of aluminum ;)

[BREAD_DA_PAINTER]

i have one of those on my karta and i have had no problems so far... only used a couple times... here is where i got mine.. you tell him the size you want and the color...

http://cgi.ebay.com/CCM-Chipley-Angel-Heli-Clamp-feedneck_W0QQitemZ200125548181QQihZ010QQcategoryZ3 6285QQcmdZViewItem

:cheers:

[rawbutter]

I use one of these for a Halo Frontman... so it should work with your Halo B.

I did have to really screw it in, though.... almost to it's tightest setting. I didn't realize Halo feednecks were so narrow.

[mostpeople]

Interesting, haloB feednecks are considered some of the biggest, they dont even fit into mag stock feednecks..

[d4m4don3]

Uhmm it will fit, with a no-pro feedneck you will have to cut the hopper feedneck, a low rise or a mid would be better if you don't want to cut your halo.

[Empyreal Rogue]

CCM, BP or FBM FTW.

Not a fan of the Sub-Zero, or haven't used it?

[Chaos_Theory!]

Uhmm it will fit, with a no-pro feedneck you will have to cut the hopper feedneck, a low rise or a mid would be better if you don't want to cut your halo.

You dont have to cut anything, the loader just wont sit flush with the feedneck.

[maniacmechanic]

I have 1 and it works BUT I don't care for it , just not enough hopper neck in the feedneck

[Siress]

Anyone else notice that impulse threaded feednecks fit ULE bodies perfectly?

[fullofpaint]

yep, they're very similar threads and they'll work almost. I have one in mine right now, it is alright, but if you hit it hard it'll strip, which is what happened to me, dived into the snake and there went my loader and feedneck, stripped the threads on the body and the feedneck.

[robnix]

Not a fan of the Sub-Zero, or haven't used it?

Sub-Zero FTW, I use it on all my mags. I like the wide neck, the profile, and how the design of the clamp makes it look like it's swept backwards.

[rkjunior303]

Not a fan of the Sub-Zero, or haven't used it?

haven't used it. i like the lever-locking ones, so i stick to the FBMs. Feednecks are Feednecks, generally. they'll all do the same thing.

[warbeak2099]

Can't go wrong with a CCM. Go for it.