New Toy Came Today

[Gambit1106]

Look wat was waiting for me at the door today when I got home. I'll post info as I try it out.

Darren

[Dave]

Ooohhhh!!!!!! Very nice!!! I like a lot!!! Its very sleek looking, I like that.

-Dave

[Gambit1106]

Well first off its noisey compared to a revy. I can get used to that. Second anyone getting one becareful how you install the batteries. Reason for this is that there is a holder for the 6 AA batteries that connects to a 9v plug. When you close the door and the connector is facing up you will push the plug off of the battery pack. I found that out in the first 20 minutes of playing with it.

So far I like it. Its heavier than a revy but once again I can adapt. The feed rate visually seems faster. I'll find out when I get it on my gun with the warp and rip on the trigger.

Thats it for now.

Darren

[personman]

Preeetttyyy... *drool* Shiinnnnyyyyyy *drool* Fast Feeedddinng *drool*

[Gunga]

Be sure to let us know how well it fits on your Warp as compared to your Revvy. Did you do the 'hole mod' to your revvy for the warp hose?

[MajorDamage]

Sweet! But you don't want that! Give it to me! <B>ME!</B>

ENDO!

[CTG]

Gambit1106 Look at the pictures on the back of the manual, its important the connector is in the upper right corner not the lower left. Also route the wires to the side (see picture). Yes the feed rate is faster but more important is the consistency of the feed. Try it on a gun and let me know if you think its noisy.

[Gambit1106]

OH instructions, your supposed to read those? Oh look pictures too. :D My wife always yells at me to use instructions and I always say, "I'll figure it out". Thanks CTG I will have to go get air in the morning and shoot up the fence and see about the noise.

Darren

[Gambit1106]

Couple more pics

[Gambit1106]

from the front

[oneshot]

looks nice :D

[Bonx0007]

Hey that looks like it fits well. i was told otherwise. hmm
perhaps it could fit better.

[MajorDamage]

Sweet! Give it to meeeeeee!

ENDO!

[Gecko]

where did you get it from? I want to order one but don't wanna be waiting forever to get it.
Gecko

[Gambit1106]

Gecko

I ordered it about 6 months ago from www.nationalpb.com . Also I think the fit helps a bit because I drilled my warp plate to come off the gun at a 90 degree angle. It gives a bit more room to angle the warp slightly and turn the loader a bit to clear the hose. Otherwise it feeds great I looped it on my warp to feed back in the hopper. I won't have to worry about overshooting anymore.

Darren

[Gambit1106]

Warp plate at 90 deg off of gun

[pito189]

The door is so clear it looks like there is not one on the hopper.

[Crazy]

how is it size wise compared to the revvy?

[pito189]

Here is a picture from the Halo thread.

[RSUAVE911]

I WANT A HALO SOO BAD...ITS LOOKS SO SLEEK...your setup looks really cool the HALO mkes it look real SLEEK!

[RobAGD]

I'll be using mine this weekend on a few guns. I dont know if I'll have my Emag back sunday or not.

-Robert

[paintballer187]

that looks very sleek on a warp, i like it a lot, very cool

[Mild 7]

Nice! Looks heavy!

[Jonno06]

Halo is very nice*drool,while drooling more*,only bad thing is price....you can get !3! 9volt revvys for !1! Halo loader

[deded]

the HALO guy is gonna be in the chatroom tonight!

Can't wait!

[StanBo]

Very nice.

Please post any of your opinions after you use it in play.

[clockworkmiller]

Thank you gambit. Now excuse me while I change my shorts.:D

[MajorDamage]

Sweeeeet! And yes, the door of the Halo is sooooo clear! I was wondering if it was open :D! I WANT! It looks shorter than the Revvie actually!

ENDO!

[GallagherAtWar]

Does it bounce ball like a richieot or how ever you spell it?

[Gambit1106]

Well here is my update.

I had mentioned earlier that it seemed noisey. When you start shooting nothing seems noisey. All you hear is your gun shooting and someone shouting "I'm out". Next people are asking if its heavy. It is a bit heavier that a revy but nothing too dramatic. You don't notice a difference to your gun. It does balance very nice on my vert feed gun.

Now the the good stuff: HALO is great I am able to run strings of paint with no feed problems. Usually the hopper is empty before I realize it. I did have to sand down the feed neck so it would fit in my feed tube on my other gun. (no big deal) The fit for it in my warp is nice and tight so no worry of it falling off.

Overall I have to say that HALO is by far way ahead of the rest. I would say to anyone to get one if you can get your hands on one.

Darren

[Hasty8]

http://store.yahoo.com/predatorpaintballonlinestore/halo.html

109.99 instead of 136.95. Saves you enough for two six packs of ....carbonated stuff. And some chips. And a Big Mac.

Mmmmm....Big Mac.....

[shartley]

Looks very nice... much better than I thought it would with a Warp Feed setup.

I guess you will have to learn to NOT shoot now. ;)

[deded]

gambit:

did you notice the halo coming back any farther towards your face then the revvy did?

It seems like w/that 90* setup, the loader would be hitting your mask sometimes... does it do that?

You have my dream setup :D I just want to make sure it'll work.

[Lone Gunman]

Screw a Big Mac... mmmmmmmmm... Blue and Silver Advantage RPS balls... ahhhlllggg.

Nice, veeerrry niiiccce.

[Gambit1106]

dedee,

No I don't have any problems with it hitting my mask. It is actually further forward in this setup so there is less of a chance of it being in the way.

Darren

[Snooky]

looks like it is very big compareded to the gun does it get in ur way when shooting?

[damageinc54]

I have one on the way for my EMag also. Should have it by Wednesday. I will start my own thread once I get it and play with it.

[GallagherAtWar]

whats different about this compared to the revey? like how it works and also does it bounce balls off like the r2k?

does it have an lcd disply and wats on it

[j7million]

Anyone with one of those wanta get rid of their 12v revy :-)? How much?



I'm slowly moving up in the world.