dyeforever
10-16-2007, 01:53 AM
heres how i made my 15* foregrip.
get a bottomline asa that is angled like this. (sorry i cut it already)
http://img520.imageshack.us/img520/3844/15asa001ix2.jpg (http://imageshack.us)
http://img520.imageshack.us/img520/3844/15asa001ix2.9b41b78a56.jpg (http://g.imageshack.us/g.php?h=520&i=15asa001ix2.jpg)
now either strap to a straight surface or bolt it on ur trigger frame and put it in a vice.(sorry no pic) now cut the asa in half like the image above. make sure its a pretty straight cut. notice how i still have one bolt hole.
take your body off but leave your rail on. install a nut on top of the front screw and field strip screw.
http://img98.imageshack.us/img98/9924/15asa007mm2.jpg (http://imageshack.us)
ok now that you cut the asa in half (o hopefully didnt cut ur frame too bad ;) ) hold it against your rail and trigger frame. like so.
http://img155.imageshack.us/img155/6251/15asasp1.jpg (http://imageshack.us)
now you can either mark, drill, and tap into the frame or mark, drill, tap into the asa. I recommend tapping the asa due to it having more to tap into.
in the frame
http://img132.imageshack.us/img132/6425/15asa003fp7.jpg (http://imageshack.us)
into the asa
http://img80.imageshack.us/img80/7415/15asa006qr2.jpg (http://imageshack.us)
i used a 10-32 tap with a 5/32 drill bit. (same bolt threads as the front screw.)
Bolt your asa up to your rail or frame(whichever one you tapped) and reassemble your gun.
http://img181.imageshack.us/img181/7042/15asa005gl3.jpg (http://imageshack.us)
Congratulations! now u have a working 15* foregrip.
let me know if u need anymore pics.
get a bottomline asa that is angled like this. (sorry i cut it already)
http://img520.imageshack.us/img520/3844/15asa001ix2.jpg (http://imageshack.us)
http://img520.imageshack.us/img520/3844/15asa001ix2.9b41b78a56.jpg (http://g.imageshack.us/g.php?h=520&i=15asa001ix2.jpg)
now either strap to a straight surface or bolt it on ur trigger frame and put it in a vice.(sorry no pic) now cut the asa in half like the image above. make sure its a pretty straight cut. notice how i still have one bolt hole.
take your body off but leave your rail on. install a nut on top of the front screw and field strip screw.
http://img98.imageshack.us/img98/9924/15asa007mm2.jpg (http://imageshack.us)
ok now that you cut the asa in half (o hopefully didnt cut ur frame too bad ;) ) hold it against your rail and trigger frame. like so.
http://img155.imageshack.us/img155/6251/15asasp1.jpg (http://imageshack.us)
now you can either mark, drill, and tap into the frame or mark, drill, tap into the asa. I recommend tapping the asa due to it having more to tap into.
in the frame
http://img132.imageshack.us/img132/6425/15asa003fp7.jpg (http://imageshack.us)
into the asa
http://img80.imageshack.us/img80/7415/15asa006qr2.jpg (http://imageshack.us)
i used a 10-32 tap with a 5/32 drill bit. (same bolt threads as the front screw.)
Bolt your asa up to your rail or frame(whichever one you tapped) and reassemble your gun.
http://img181.imageshack.us/img181/7042/15asa005gl3.jpg (http://imageshack.us)
Congratulations! now u have a working 15* foregrip.
let me know if u need anymore pics.