View Full Version : Tap
mag79
10-27-2007, 07:15 PM
Does anyone know the tap size for a micriline fitting? :confused:
rawbutter
10-27-2007, 07:28 PM
1/8 NPT. Like this
http://cgi.ebay.com/NEW-HSS-Tapered-Pipe-Tap-NPT-1-8-27_W0QQitemZ220163439638QQihZ012QQcategoryZ58228QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
mostpeople
10-27-2007, 07:28 PM
1/8" Npt
i Think
mag79
10-27-2007, 07:43 PM
Thanks Guys :hail:
Fantom
10-27-2007, 08:26 PM
1/8" NPT is one of the few taps that Lowe's and Home Depot carry and cost about seven bucks.
SR_matt
10-28-2007, 12:12 PM
make sure you use the right bit with the tap, the package should tell you if not google it and you should find a chart that lists the right bit.
-matt
Freebird
10-28-2007, 05:59 PM
make sure you use the right bit with the tap, the package should tell you if not google it and you should find a chart that lists the right bit.
-matt
i know dewalt sells the 1/8npt tap and correct sized drill bit as a kit for 18$
mag79
10-28-2007, 06:09 PM
Thanks for all the info guys
I work at a major aircraft manufacturer, I just need the tap size. I can get the taps and drill at work
mr doo doo
10-28-2007, 06:24 PM
micro or macroline? macroline and SS hose are 1/8 npt. micro? :confused:
mag79
10-28-2007, 07:13 PM
micro or macroline? macroline and SS hose are 1/8 npt. micro? :confused:
Thanks I have more hat needed :clap:
rawbutter
10-28-2007, 08:17 PM
Whoops.... you definitely said microline. 1/8 NPT is for macroline fittings. So I totally told you the wrong thing. (But... one look at the tap and you would have figured that out. It's twice the size of a micro fitting.)
For microline fittings, you want a 10-32 machine tap. Like this.
http://www.lowes.com/lowes/lkn?action=productDetail&productId=232570-1083-358041&lpage=none
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.